Products

EBECRYL® 3708 is a modified bisphenol A epoxy diacrylate that exhibits relatively low viscosity and good cure response. Films of EBECRYL® 3708 cured by ultra- violet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, and superior impact resistance.

EBECRYL® 4141 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal.

EBECRYL® 4397 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. EBECRYL® 4397 exhibits greater flexibility in comparison to other isocyanate functional urethane acrylates such as EBECRYL 4150(1).

UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, both transparent and pigmented, but can also be used for other applications and substrates, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. This polyurethane dispersion is very reactive and exhibits very good scratch resistance. Due to the low viscosity, it can be applied by spray or curtain coater.

EBECRYL® 645 functions as a binder and resin in CASE ingredients and is compatible with wood substrates.

EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing.

RHOPLEX® CL-106 acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers based on RHOPLEX® CL-106 acrylic emulsion are translucent in the can and upon application turn clear very rapidly while drying. RHOPLEX® CL-106 acrylic emulsion was developed for use in topcoat finishes and as such does not provide optimum appearance qualities if used as a sealer. In multi-coat systems, the finest overall appearance is obtained when RHOPLEX® CL-106 acrylic emulsion is used over specialized sealer formulations. It is recommended that RHOPLEX® CL-106 acrylic emulsion be used over sealers formulated from RHOPLEX® CL-105 emulsion. In this manner, RHOPLEX® CL-105 emulsion contributes excellent wood fiber wetting, appearance characteristics, and early sandability to the system while RHOPLEX® CL-106 emulsion provides a topcoat with hardness, mar resistance, and clarity. The volatile organic content (VOC) of typically formulated clear topcoat lacquers is less than 2.3 lb/gal and hazardous air pollutants (HAPs) are 0.3 lb HAPs/lb solids.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics.

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

EBECRYL® 640/20 TO is a modified diacrylate ester of bisphenol A epoxy resin. This product is characterized by its light color, fast cure response and improved pigment wetting. Films of EBECRYL®640/20 TO cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. EBECRYL®640/20 TO finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes.

EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties.

RHOPLEX® DCR-113 is an aqueous all acrylic emulsion polymer designed for formulating into high solids Deck and, Concrete Restoration coatings. Low VOC, APEO-free restoration coatings can be formulated with RHOPLEX® DCR-113 to provide excellent abrasion resistance and flexibility, in addition to adhesion to concrete and well-weathered wood.