Products

MAGNESIUM STEARATE SW/F/1 VEG - US is a low to medium bulk density, fine white powder.

CEASIT AV - US is a high bulk density, very free flowing granulate.

DERMULSENE® RE 1513 is an aqueous, solvent free resin based on stabilized rosin ester.

ZINC STEARATE RSN VEG are high bulk density, granular powder.

NANO-FLEX® Talc (D) is designed for use in high performance TPO applications that require high brightness and an extremely high balance of stiffness and toughness. It is made by a proprietary process that results in a very high aspect ratio, excellent dispersion, and unmatched heat aging while offering excellent compounded color. NANO-FLEX® Talc (D) is also available in a densified form as NANO-FLEX Talc-D, which can improve handling and initial compounding.

Elevast™ D50 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

ASPECT® 3 is a mid-range talc product line specifically engineered for under-the-hood use in TPO applications when a natural grade is not needed.

CLEAR-BLOC® 100 C is surface coated talc thet are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 100 C is platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC® 100 C is produced with a priority process grinding system to improve consistency and uniformity of the material. CLEAR-BLOC® 100 C is available in powder form and in a CS design which increases the bulk density from 12 lbs to 60+ lbd for feed systems requiring a quick mix and complete dispersion of the sized material while increasing the throughput of your line.

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

DERCOLYTE® S 115 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).

CIMTALC® 7 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTALC® 7 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTALC® 7 is are platy, hydrophobic, non-abrasive and chemically inert.

CIMTALC® 3D is used in ornamentals, pest control, and turf management. It functions as a flux and low shrink additive in plastics and elastomers.