Products

CIMBAR EX is used as a filler and pigment in paints and coatings.

Baerolub® PE Powder/2 is a powder hydrocarbon wax.

Ceridust® 3715 is a micronized, polar modified polyethylene wax recommended for solvent and water based coatings and inks.

Baerolub® OP-15 is a prill oxidized low density polyethylene wax.

AEROSIL® R 974 W Coating is a hydrophobic fumed silica after-treated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 200 m²/g. The product thickening efficiency of AEROSIL® R 974 W Coating ex RHE is consistent with the Waterford-produced AEROSIL® R 974. This profile is different than the thickening profile of standard RHE quality.

CYCAT® 600A is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol).

CIMTUFF® 9103 D is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTUFF® 9103 D is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTUFF® 9103 D is are platy, hydrophobic, non-abrasive and chemically inert.

D.E.R.® 662UH Solid Epoxy Resin is a low molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 662UH Epoxy Resin is designed for decorative powder coating applications requiring good flow and gloss. The melt viscosity and good reactivity of D.E.R.® 662UH Resin make this resin particularly suitable for the formulation of hybrid powder coatings. The resin can also be used alone with conventional curing agents for pure epoxy powder coatings.

Castung™ 103 G-H is an un-bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. Castung™ 103 G-H is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non-yellowing and outstanding color retention characteristics.

DERTOPHENE® T is a light-colored and low VOC terpene phenolic resin compatible with acrylics, various elastomers and waxs. It allows to improve the performance of hot melt and solvent based adhesives such as specific adhesion and tack.

HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. HIKOTACK® P-90S can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete curing agent and binder for asphalt.

ZINC STEARATE GPSF-VEG CODE 5896 is a low bulk density, very fine white powder.

CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax.

PerformaFlex D is a mineral and phyllosilicate based product used in building and construction applications.

NANO-FLEX® Talc (D) is designed for use in high performance TPO applications that require high brightness and an extremely high balance of stiffness and toughness. It is made by a proprietary process that results in a very high aspect ratio, excellent dispersion, and unmatched heat aging while offering excellent compounded color. NANO-FLEX® Talc (D) is also available in a densified form as NANO-FLEX Talc-D, which can improve handling and initial compounding.