Products

Flexricin® P-3 is an outstanding plasticizer for polyvinyl butyral, rosin, vinysol resin and cellulose acetate butyrate resins. It also functions as a general purpose plasticizer for both nitrocellulose and ethylcellulose resin systems, and as an internal reactive plasticizer for polyurethanes.

40 OIL is a single-ingredient white mineral oil from the hydrocarbons chemical family. It is refined and features low viscosity.

Paricin® 220 is N-(2-hydroxyethyl)-12-hydroxy- stearamide. It is a high melting point wax like material that has broad compatibility with natural and synthetic waxes, resins and polymers to provide excellent slip and lubricating properties.

P-™10 Fatty Acids derived from pure castor oil. P-™10 Fatty Acids is the building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

Flexricin® P-6 is a highly efficient plasticizer for nitrocellulose lacquers, vinyl resins and many other natural and synthetic resins. It provides good permanence and can be used in conjunction with the polymerized castor oils.

Surfactol® 365 is an ideal low foaming emulsifier for oil/water emulsions. It provides a means of using the basic properties of castor oil lubricity, penetration, pigment wetting, compatibility in a water-based system.

AA™ Standard Castor Oil is a commercial, quality refined grade castor oil. It is a light-colored viscous liquid. The principle constituent (approximately 90%) is the triglyceride (ester) of ricinoleic acid. The combination of hydroxyl group and unsaturation exists only in castor oil.

Flexricin® P-1 is a clear, bright, low viscosity liquid. It is a low temperature plasticizer for rubber polymers in the production of low durometer stock. It functions as a lubricantm plasticizer for phenolic molding compounds and as a plasticizer for epoxy resin systems.

Flexricin® 15 is a di-hydroxy ester that is effective as a plasticizer and lubricant. It is a more viscous castor-based ester and will impart hydrocarbon resistance to plug-valve greases with good low temperature and low viscosity properties.

Castung™ 103 G-H is an un-bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. Castung™ 103 G-H is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non-yellowing and outstanding color retention characteristics.

Castung™ 403 Z-3 is a bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. The high viscosity Castung™ 403 Z-3 will yield faster processing and drying times than Castung™103 G-H. Castung™ 403 Z-3 is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non- yellowing and outstanding color retention characteristics.

LUBRICIN® N-1 is a highly refined methyl ricinoleate for lubricating oils, motor fuels, upper cylinder lubricants, cutting oils and gear oils. It functions to reduce rusting, corrosion and wear of metal parts and exhibits detergent action on tar, varnish and carbon deposits.

Flexricin® P-4 is a clear, low viscosity, low temperature plasticizer for many resin systems in the production of low durometer stock. It functions as a general purpose plasticizer and processing aid, and imparts exceptional cold crack resistance to flexible nitrocellulose lacquers.

ZINC STEARATE RSN 131 HS GRANULAR CODE 8512 is a high bulk density, free-flowing granular powder.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.