Products

Crestapol® 1212 is a resin, binder, and matrix material that offers excellent toughness, low viscosity, non-post cure, and rapid cure response. It is used in composite materials.

D.E.H.® 29 Epoxy Curing Agent is an economical, liquid, complex mixture of linear, branched and cyclic ethylene amines. D.E.H.® 29 Epoxy Curing Agent offers more flexibility versus DETA,TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits,two-pack adhesives, and other applications where color is not a limitation. In adhesives,D.E.H.® 29 Curing Agent yields much higher peel strength than DETA or TETA at comparable gel times and lower cost.

D.E.H.® 39 Epoxy Curing Agent is a liquid cycloaliphatic polyamine curing agent. D.E.H.® 39 Resin is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP). D.E.H.® 39 Curing Agent provides a short pot-life and cures in minutes with liquid epoxy resins. Similar in application to D.E.H. 20, 24, 26 and 29 Epoxy Curing Agents, D.E.H.® 39 Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 39 Curing Agent is used for casting, potting and encapsulation. D.E.H.® 39 Curing Agent is often used for epoxy composite materials.

D.E.H.® 58 Epoxy Curing Agent is a low viscosity accelerated aliphatic polyamine curing agent.

D.E.H.® 20 Epoxy Curing Agent is an economical, liquid diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. D.E.H.® 20 Epoxy Curing Agent is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 20 Epoxy Curing Agent is used for casting, potting and encapsulation.

CRYSTIC® 199 is an isophthalic polyester resin. It is recommended for use in high performance applications, such as the aircraft industry, where superior thermal and electrical properties are required. Fully cured laminates made with Crystic® 199 have excellent chemical and heat resistance. They can withstand long periods (1 year) at temperatures up to 150°C, and shorter periods at temperatures up to 200°C, with no serious loss of properties.

D.E.H.® 24 Epoxy Curing Agent is an economical liquid aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 20 Epoxy Curing Agent, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 24 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 24 Epoxy Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 26 Curing Agent is an economical liquid aliphatic polyamine hardener, tetraethylenepentamine (TEPA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 24 Epoxy Curing Agent in application, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 26 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 26 Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 52 Epoxy Curing Agent is a viscous aliphatic polyamine epoxy adduct curing agent. D.E.H.® 52 Epoxy Curing Agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, However D.E.H.® 52 Curing Agent is much less hygroscopic than standard polyamines. D.E.H.® 52 Epoxy Curing Agent is extremely reactive with liquid epoxy resins at room temperature and is used in the maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.® 52 Curing Agent is particularly suitable for colorless coatings or adhesive systems.

D.E.R.® 383 liquid epoxy resin is a reaction product of epichlorohydrin and Bisphenol A.

EBECRYL® MAES is a versatile monofunctional acrylate monomer that polymerizes under free radical initiation. This acid-functional diluent is compatible with various acrylated resins used in radiation curing applications, and offers superior purity, odor, and lower volatility when compared to β-CEA. It enhances adhesion on metallic, plastic, and paper substrates and is ideal for use in clear coats, inks, laminates, pressuresensitive adhesives, and other UV-curable systems. Additionally, EBECRYL® MAES is suitable for developable etch and plate photoresist formulations.

AP 5805 is an undiluted clear bifunctional liquid epoxy resin produced from bisphenol A and epichlorohydrin.

D.E.N.® 439 is a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac.

D.E.N.® 431 is a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac.