Products

Kane Ace® MX-710 is a 40% concentrate of coreshell rubber (CSR) particles – a toughening agent – in 1000 Mw polypropylene glycol. Kane Ace® MX-710 is a stable dispersion CSR particles do not separate under normal handling, formulating and curing conditions and it can be mixed or diluted with most polyols and solvents.

SURFYNOL® 355 is a substrate wetting agent with global food contact compliances. It is suitablefor waterborne coatings and inks.

Lanxess 6414 is a pigment used in architectural coatings, automotive OEM coatings, building & construction, industrial, and industrial coatings markets.

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Dynasylan® CPTEO functions as a surface modifier in CASE ingredients and plastics and elastomers.

Addovate® 3 is a single-ingredient polysiloxane compound used in polyurethane manufacturing. It is composed of polysiloxanes, di-Me, 3-hydroxypropyl Me, ethers with polyethylene-polypropylene glycol mono-Me ether, and is suitable for a variety of applications in the polyurethane production process.

ZINC STEARATE SW-100 is a medium bulk density, fine white powder.

HP7622 is a high solids, water-reducible polyester dissolved in glycol ether EB (butoxyethanol). It is soluble in water after neutralization with amine. Stability and solubility in water may be improved with additional glycol ether EB or 2-butanol. It is a very linear polymer and provides excellent flexibility when combined with amino resins in baking finishes.

AP 5689 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

Silcolapse® 801 U1 is a 100% active high viscosity foam control compound. SILCOLAPSE 801 U1 is part of family of high performance foam control agent specially designed to control foam in aggressive foaming media.

TOYOCAT®-TR20 belongs to the ammonium salts chemical family and is used in industrial and industrial coatings markets.

Additin® M 42.001 is a light color, low odor, neutral Barium Synthetic Sulfonate which provides excellent corrosion protection in the prescence of water. It is non-staining to metals and provides excellent dispersing and detergent properties.

Hatcol® 2937 is a polyol ester of trimethylolpropane specially designed for synthetic and semi-synthetic automotive crankcase lubricants.

Hostastat® 154 is a non-ionic anti-static agent with rapid static decay and reduced surface resistivity, used in polyethylene films within plastics and elastomers.