Products

EBECRYL® 210 is an aromatic urethane diacrylate. Films of EBECRYL 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

EBECRYL® 3721 is a modified bisphenol A epoxy diacrylate resin. EBECRYL® 3721 demonstrates increased toughness in ultraviolet light (UV) or electron beam (EB) energy cured coatings compared to standard epoxy acrylates while maintaining high reactivity and superior chemical resistance.

EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood. EBECRYL® 4175 is diluted with 25% dipropyleneglycol diacrylate (DPGDA)

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.

EBECRYL® 4849 is an aromatic urethane diacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 4849 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and abrasion resistance.

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings.

EBECRYL® 898 is a special purpose, 100% solids polyester acrylate resins that enables matte finishes in UV energy curable coatings, including ultra-matte coatings of <5 gloss (60°). It is compatible with other common acrylate resin types and is effective when used with typical silica matting agents. EBECRYL® 898 does not compromise performance properties such as chemical and stain resistance.

β-CEA is a mixture of reactive esters, each of which contain both acrylate and carboxylic acid functionality in the same molecule. Referring to the included structural formula, this mixture contains some unreacted acrylic acid (n=0), along with higher adducts of acrylic acid (n=1,2,3...). The dimer (n=1). β-CEA, is the largest single component, and the average molecular weight is equivalent to that of the dimer. β-CEA will polymerize when exposed to sources of free radicals. Because of its carboxylic acid functionality, β-CEA is useful as an adhesion promoter.

EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10502 is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.

EBECRYL® 81 is an amine modified polyether acrylate that exhibits very low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL 81 cured by UV or electron beam (EB) demonstrate high gloss and low residual odor. EBECRYL® 81 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.

EBECRYL® 367 is a polyester acrylate, developed to improve the adhesion of inks and varnishes onto plastics.

UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT® 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT® 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT® 7674 provides hardness in the polymerized coating along with good stain and chemical resistance.

EBECRYL® 265 functions as a binder and resin in CASE ingredients. It offers abrasion resistance, excellent adhesion, improved flexibility, outdoor durability, and yellowing resistance. It is a non-yellowing grade.