Products

CRAYVALLAC® REV is a new high performance micronised amide wax rheology modifier offering perfect recoatability for regular, high solids and solvent-free coatings. CRAYVALLAC® REV has been designed to provide reliability and efficiency in a wide range of coatings. As other CRAYVALLAC® modifiers, it overcomes technical constraints such as seeding, false-body and migration of readily dissolved species to the surface. Even used in strong solvent systems, coatings formulated using CRAYVALLAC® REV offer an enhanced performance and very good recoatability.

HYDROGRAL® G is a glycerol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long-term adhesive performances of adhesives such as insulation sealants or pressure sensitive adhesives.

DERCOLYTE® S 115 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).

CRAYVALLAC® ULTRA is a pure polyamide especially recommended in 2K epoxy primers for its robustness. CRAYVALLAC® ULTRA is a micronised amide wax rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. CRAYVALLAC® ULTRA has been designed to overcome those difficulties which exist with older type organo-wax rheology modifiers e.g. seeding, false-body and migration of readily dissolved species to the surface. Consequently, when used in strong solvent systems, coatings formulated using CRAYVALLAC® ULTRA offer an enhanced performance and very good recoatability.

CRAYVALLAC® PA4 X 20 is a rheology modifier pre-activated amide wax supplied in a mixture of xylene and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 X 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

DERTOPHENE® H 150 is a light-colored and low VOC terpene phenolic resin with high softening point. Its high polarity allows specific performances when formulated with EVA copolymers: specific adhesion, thermal resistance, cohesive balance.

PLATAMID® M 1276 Pellets is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono and multi filaments, and films by extrusion. PLATAMID® M 1276 Pellets offers a very good adhesion to various polar substrates like thermoplastics, thermosets, metal natural fibers, etc.

DERMULSENE® TR 602 is an aqueous, solvent free resin based on terpene phenolic resin.

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

PEBAX® Rnew® 72R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. PEBAX® Rnew® 72R53 SP 01 has been developed to be heat and UV resistant.

Staybelite® Ester 10 is the glycerol ester of partially hydrogenated gum rosin. It is a pale, thermoplastic resin with excellent resistance to oxidation and discoloration. It is recommended for use as a tackifying resin for many adhesive applications, particularly pressure sensitive and emulsion types. In general, it is useful where there is need for pale, non-oxidizing, and color stable resin.

Rilsan® BESNO TL is a polyamide 11 produced from a renewable source. Rilsan® BESNO is designed for extrusion.

Rilsan® BMNO is a polyamide 11 produced from a renewable source. Rilsan® BMNO contains no additive and is specially designed for food contact application.

B 4011 is a liquid Bio-plasticizer for PVC.

Ceridust® 8090 TP is a revolutionary bio-based additive for wood coatings.