Products

EBECRYL® 445 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1). EBECRYL 445 is not based on bisphenol A raw materials, and is tin-free. EBECRYL 445 exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL 445 display good adhesion to metals, and paper.

D.E.H.® 7009 is a modified polyamine suitable for solvent free primers. It is free of benzyl alcohol, nonylphenol and bisphenol A. It has also a low viscosity and long pot life.

Additin® RC 3775 is a chemical blend used as an anti-wear agent and extreme pressure additive in gear oils, hydraulic oils, industrial oils, metalworking fluids, and turbine & compressor fluids. It is applied at a dosage of 0.2-1.5% (w/w). The product provides excellent wear protection, extreme pressure performance, good load-carrying capacity, high viscosity, and is an ashless additive suitable for various lubricating applications such as compressor oils, honing oils, and turbine oils.

3M™ Ceramic Microspheres W-410 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

Additin® RC 3045 is a chemical blend used as an anti-wear agent and antioxidant in gear oils, greases, hydraulic oils, metalworking fluids, and motor oils. It is compatible with industrial oils and fluids and provides enhanced wear protection and oxidation resistance.

Additin® RC 3740 is an organophosphate-based anti-wear agent and extreme pressure additive used in metalworking fluids. It is applied at a dosage of 0.2-1.5% and is suitable for broaching oil, deep hole drilling oil, grinding fluids, honing oils, and other metalworking fluids. The product offers an ashless additive feature, promotes good surface finish, and exhibits low reactivity.

LOTADER® AX8900 is a random ethylene-methyl acrylate-glycidyl methacrylate terpolymer. Acrylic ester brings softness and polarity, while keeping high thermal stability during processing. The high content of acrylic ester leads to high flexibility (low crystallinity) and high impact absorption behaviour. Glycidyl methacrylate provides reactivity (versus OH, COOH and NH₂ groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8900 is compatible with LDPE in all proportions, and with almost all other ethylene copolymers. LOTADER® AX8900 is suitable as an additive to improve impact strength of engineering thermoplastics (PPS, PBT, PET) and PC/PBT, PC/PET and PC/ABS alloys. LOTADER® AX8900 can be used as a compatibiliser for polyesters/polyolefins blends and in some formulated adhesive tapes.

Hybase® C500 is a 500 TBN oil soluble overbased calcium sulfonate. It provides the highest TBN of calcium carbonate available in a liquid, oil based format. Hybase® C500 is a typically used as a detergent and rust inhibitor in crankcase lubricants. It is designed as a both a stand alone detergent as well as in conjunction with other detergent types, such as calcium phenate.

Hatcol® 2938 is a pure polyol ester base stock based on trimethylolpropane which combines excellent high temperature oxidative and thermal stability with low temperature flow.

Esterex™ A51 is a API category Group V fluids. Esterex™ A51 has excellent low temperature properties, high viscosity indices, good lubricating properties, and low volatilities. Esterex™ A51 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ A51 is ideal in high temperature conditions, such as reciprocating air compressors, where discharge valve cleanliness is required.

Additin® RC 2317 is a light-colored, near odourless, low viscosity sulphur carrier. It is used for manufacturing metalworking fluids for cutting operations. Due to its low viscosity Additin RC 2317 is ideally suited for formulating metalworking fluids such as deep hole drilling and honing oils from which an excellent flushing effect is required. By virtue of specially selected raw material Additin® RC 2317 exhibits a very low pourpoint and extended solubility in various base fluids compared to conventional sulphur carriers. Therefore Additin® RC 2317 is ideally suited for metalworking oils based on hydrocrack oils

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

Dynasylan® 6598 is an oligomeric siloxane containing vinyl, propyl and ethoxy groups. Dynasylan® 6598 is a further development of Dynasylan®VTMOEO, vinyl-tris(2-methoxy ethoxy)silane. Dynasylan® 6598 is a colorless, nearly odorless low-viscosity liquid. Dynasylan® 6598 is an excellent silane compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (EPDM, EVA, PE).

3M™ Ceramic Microspheres W-610 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

K-FLEX® DP is dipropylene glycol dibenzoate, which is one of the oldest members of the benzoate plasticizer family and one of the most versatile polar, high solvating plasticizers still commercially available. K-FLEX® DP is compatible with a wide range of polar polymers and rubbers and is often blended with other plasticizers such as K-FLEX® DP (diethylene glycol dibenzoate).