Products

Hostavin® 3058 liq is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency.

Ceridust® 6050 M is a micronized metallocene-based polypropylene wax.

3M™ Ceramic Microspheres W-410 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

XIBOND® 370 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random terpolymer of styrene, maleic anhydride and N-Phenylmaleimide.

XIBOND® 185 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

Hostanox® O 310 micro pills effectively combines extraordinary high extraction resistance and hydrolytic stability with good stabilization performance. Therefore Hostanox® O 310 is predestined for the stabilization of polymer articles requiring high level of stability even after an exposition to extractive media (e.g. water, solvents, etc.)

EVATANE® 33-45 is a random ethylene-vinyl acetate copolymer.

OREVAC® 18730 is a maleic anhydride modified polypropylene.

Licolub® FA 1 powder vegetable based is an amide wax of type N,N-bis-stearyl ethylenediamine with particularly good thermostability. It provides typical slip and antiblocking characteristics to all polymers, e.g., in films. Licolub® FA 1 powder vegetable based does not affect the transparency of polymers and acts as a lubricant in a wide variety of polymers like PVC, PO, PS, and engineering plastics. Licolub® FA 1 powder vegetable based is produced from a raw material of vegetable origin.

Exolit® RP 6520 is a brown-red paste, and is a thixotropic blend of castor oil with stabilised, microencapsulated red phosphorus. The paste form allows safe and simple handling and thus processing is made easier. The thixotropic nature of this concentrate hinders the sedimentation process and simplifies the re-homogenisation after long storage periods.

Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable.

RE:CHEMISTRY MOVE200 is a pure ester-based Solvent. 58% Biogenic Carbon (derived from agricultural waste) according to ASTM D6866-20. Readily biodegradable. Non-flammable, Non-combustible and Low volatile. Classified as Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Butyl Levulinate is a GRAS.

Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 935 can easily be dispersed in solvents like acetone or MEK.

BONDERITE® L-GP 154, a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush, or dip techniques. BONDERITE L-GP 154 ACHESON is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics. BONDERITE L-GP 154 ACHESON has been specified throughout the electronics industry in a multitude of roles. It can easily be blended with BONDERITE L-GP M 210 ACHESON (molybdenum disulfide insulating coating) to attain cost-effective sheet resistance variations.