Products

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

SILIKOTOP® E 900 is a binder and resin used in 2K coatings, protective coatings, solventborne coatings, and solventless and high solids coatings. It offers chipping resistance, high impact resistance, high viscosity, low VOC, and weather resistance.

Polycin® T-400 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® T-400 will impart higher hardness and strength, and as a reactive diluent, Polycin® T-400 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, both transparent and pigmented, but can also be used for other applications and substrates, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. This polyurethane dispersion is very reactive and exhibits very good scratch resistance. Due to the low viscosity, it can be applied by spray or curtain coater.

VANCRYL® 960 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 960 is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 960 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

Experimental DLVNE-61 is a medium low viscosity Novolac resin modified with a Cycloaliphatic polyglycidyl ether (free of any organic solvent) that facilitate high solids coating formulations with low volatile organic compound (VOC) emissions, improved application, strong chemical and thermal resistance.

RHOPLEX® WL-81, waterborne, acrylic polymer is specifically designed for the formulation of clear and pigmented ambient or forced-air-dry industrial lacquers. Coating systems based on this polymer are suitable for use on a variety of substrates and offer a number of key benefits currently provided by solvent borne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems.

VANCRYL® 450 is a high solids colloidal dispersion that can be neutralized with ammonia or other alkaline materials to provide an outstanding vehicle for corrugated printing ink applications. VANCRYL® 450, at 40% solids, reduces the cost in ink systems based on pre-neutralized colloidal acrylics. VANCRYL® 450 exhibits excellent black pigment grinding, and high drink in corrugated systems. This polymer, when neutralized with ammonia at 10% solids in water, has a viscosity of 150 cP, or about 40 seconds on a # 2 Zahn cup. It provides excellent transfer and printing at this low, economical solids level. Neutralization can be easily accomplished by a simple mixing of 100 parts polymer wet, 95 parts water, and 5 parts ammonia. This mixture produces a 20% solids colloidal emulsion with a viscosity of 6000 to 9000 cP. It can be used in black pigment dispersions as well as color letdowns for corrugated inks. VANCRYL® 450 is also an effective thickener for other formulations based on acrylic and styrenated acrylic polymers.

TAMOL® 2011 is a high-performance, hydrophobic copolymer dispersant especially useful for semi-gloss and gloss paints. TAMOL® 2011 is well suited for today’s generation of formulations as it is made without solvents or APEO surfactants. TAMOL® 2011 is particularly well fitted for formulations that contain hydrophobically modified urethane rheology modifiers.

CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 Resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 Resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin.

RHOPLEX® DCR-113 is an aqueous all acrylic emulsion polymer designed for formulating into high solids Deck and, Concrete Restoration coatings. Low VOC, APEO-free restoration coatings can be formulated with RHOPLEX® DCR-113 to provide excellent abrasion resistance and flexibility, in addition to adhesion to concrete and well-weathered wood.

RHOPLEX® AC-464 is a binder and resin used in waterborne paint applications, functioning as a binder.

ELVACE® 731 is a vinyl acetate-ethylene copolymer.

AVANSE™ ST-410 is a new high-performance, 100% acrylic, waterborne polymer can be formulated to meet the toughest VOC standards and still outperform traditional solvent and waterborne semitransparent stain technologies. Semitransparent stains based on AVANSE™ ST-410 Acrylic Emulsion do not require coalescent or heavy metal driers, they are easy to apply, and they enhance the appearance of new and weathered wood with a long-lasting finish. In addition, the combination of morphology and unique particle stabilization maximizes the flow and lapping characteristics during application, while building early resistance properties upon drying.

FASTRACK™ HD-21A Emulsion is an acrylic emulsion binder for high-durability traffic markings. Using a patented crosslinking technology, FASTRACK™ HD-21A Emulsion combines exceptional durability with the ease of handling and application typically associated with water-based technology. Designed to be a true waterborne durable traffic paint, FASTRACK™ HD-21A Emulsion is an excellent choice for situations where existing waterborne paint equipment is available, and where the additional benefits of rapid drying and excellent glass bead retention are critical. The ease of cleanup, enhanced worker safety, and reduced disposal costs are inherent features of FASTRACK™ HD-21A Emulsion that can translate into additional value and convenience for pavement marking applicators.