Products

K-FLEX® DP is dipropylene glycol dibenzoate, which is one of the oldest members of the benzoate plasticizer family and one of the most versatile polar, high solvating plasticizers still commercially available. K-FLEX® DP is compatible with a wide range of polar polymers and rubbers and is often blended with other plasticizers such as K-FLEX® DP (diethylene glycol dibenzoate).

Elevast™ D50 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

Additin® RC 8210 is a chemical blend used as an extreme pressure additive and metal deactivator in gear oils, greases, hydraulic oils, metalworking fluids, and turbine & compressor fluids. It is odor-free, providing excellent performance in compressor oils, gear oils, greases, hydraulic fluids, and turbine oils.

Naugalube® 750 is an antioxidant used in appliances and electronics, automotive fluids and lubricants, cold chain and insulation, marine fluids and lubricants, transmission fluids, and general fluids and lubricants. It is suitable for engine oils, gear oils, hydraulic fluids, and turbine and compressor oils.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

Calcinate® C-400W is a 400 TBN modified overbased calcium sulfonate containing a high level of crystalline "calcite" calcium carbonate. Calcinate® C-400W is designed to provide excellent extreme pressure, anti-wear and anti-corrosion properties to a lubricant. It is recommended for use in rust protective and forming oils as a chlorine replacement to impart enhanced extreme pressure characteristics of a crystalline overbased calcium sulfonates. This product is used as a component in metal working fluids where the unique lubricity and extreme pressure properties of calcium carbonate are utilized. Calcinate® C-400W is compatible with most mineral base oils, white oils, and synthetic base stocks.

ZINC STEARATE RSN 131 HS GRANULAR CODE 8512 is a high bulk density, free-flowing granular powder.

WACKER® AK 60000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 60000 mm²/s. Due to its chemical structure, WACKER® AK 60000 has an outstanding property profile, which sets it apart from organic materials such as mineral oils.

Exolit® AP 422 A is a fine-particle ammonium polyphosphate (phase II) with less than 0.1% melamine. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic, non-flammable, and classified as SVHC-free under current regulations.

ELIX™ 152 I is a high rubber content ABS copolymer used for polymers modification purposes.

Esterex™ A51 is a API category Group V fluids. Esterex™ A51 has excellent low temperature properties, high viscosity indices, good lubricating properties, and low volatilities. Esterex™ A51 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ A51 is ideal in high temperature conditions, such as reciprocating air compressors, where discharge valve cleanliness is required.

Additin® RC 3048 is a chemical blend used as an anti-wear agent and antioxidant in gear oils, greases, hydraulic fluids, and metalworking fluids. It is provides enhanced wear protection and oxidation resistance in various lubricants and industrial fluids.

LOTADER® 9318T is a random ethylene-vinyl acetate-maleic anhydride terpolymer (EVA- MAH). As an ethylene copolymer, LOTADER® 9318T is compatible with PE in all proportions, and with most ethylene copolymers. Vinyl acetate brings softness, flexibility, and polarity while maleic anhydride brings reactivity, leading to versatile adhesive properties to polar and non-polar substrates. As a result of high-pressure polymerization in tubular reactor, LOTADER® 9318T also exhibits high transparency (low haze). LOTADER® 9318T can be used to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminium foils, fiber mats, foams. LOTADER® 9318T is also suitable as a tie layer between polyethylene and polyamide in blown film, cast film or in tubes co-extrusion. It can be used as a coupling agent in cables compounds formulations.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.