Products

RHOPLEX® VSR-50C Binder is a 100% acrylic latex designed for premium architectural flat to gloss interior and exterior coatings. Its low coalescent demand allows the formulator to meet 50 g/L VOC regulations with some freeze-thaw capability. RHOPLEX® VSR-50C Binder offers excellent surfactant leaching, water resistance properties, and alkali resistance. It provides proven superior exterior durability after several years of exposure over a variety of substrates such as wood, metal, and masonry for dirt pick-up resistance, efflorescence resistance, crack resistance, and tint retention. It is easy to formulate, slurry compatible, and has good block resistance.

BONDERITE® S-FN 8301 is designed for lubricant applications where environmental regulations restrict emissions of VOC (Volatile Organic Compounds). BONDERITE® S-FN 8301 provides good wear, low coefficient of friction, solvent resistance, and resistance to chalking in UV exposure. After dip or spray application, BONDERITE® S-FN 8301 can be either air dried or forced dried with heat. This superior coating material offers lifetime lubrication for heat-sensitive substrates, complex machined precision steel parts, light metals (copper, aluminum), and some non-metallic materials.

Dynasylan® F 8815 is a fluoroalkylfunctional water-borne oligosiloxane which acts as a surface modification agent on oxidic, carboxy- and hydroxyfunctional substrates for example ceramic, natural fibers like cotton or leather. Dynasylan® F 8815 is a yellowish, slightly turbid liquid. The product can be mixed with water to any desired concentration.

RHOPLEX® 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The low coalescent demand of RHOPLEX® 585 allows the formulator to meet the 50g/VOC regulations while still maintaining some freeze thaw stability. Due to its 100% acrylic composition, RHOPLEX® 585 offers good exterior durability.

BONDERITE® S-FN 330 ACHESON offers clean, dry, long lasting, solvent resistant lubrication for sliding, rubbing or rolling surfaces. BONDERITE® S-FN 330 ACHESON is a resin-bonded PTFE lubricant supplied as one component in ready-for-use form. Its low temperature cure of 50°C (300°F) does not affect heat-sensitive substrates such as light metals, wood, rubber and some plastics. The extremely thin coating of BONDERITE® S-FN 330 ACHESON necessary to achieve maximum lubrication (from 0.0003 to 0.0007 inch, or 0.008 to 0.018 millimeter) allows post-treatment of parts while maintaining original part dimensions without redesign. In many cases, BONDERITE® S-FN 330 ACHESON coating can replace metal plating or finishing and offers improved performance at lower cost.

H.B. Fuller® HM-1580 is a ready-to-use adhesive known for chemical resistance, oil and solvent resistance, good adhesion, medium open time, and excellent performance at both high and low temperatures.

D.E.R.® 684-EK40 is a ultra-high molecular weight epoxy resin solution in methyl ethyl ketone.

TEGO® VariPlus AP improvesgloss and adhesion on various metals (e.g. steel, aluminium). As a solvent-freeco-binder, it is recommended for high-solid industrial coatings and for UV-offset inks.

PURMOL™ 4ST is a sodium (Na) type A zeolite with a pore size of approximately 4 Angstroms (0.4 nm). PURMOL™ 4ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate. With metal dust coatings we recommend the addition of 0.5% - 2% PURMOL™ 4ST powder.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.

BONDERITE® L-GP is a water-based lubricant carrier, designed for use in mold applications. It can be applied by spray and is compatible with aluminum and metal surfaces. The product is non-flammable and non-toxic, offering several key features such as good mold protection, excellent release properties, a smooth surface finish, and improved wear resistance. It is a ready-to-use product that provides reliable performance in mold-related applications.

SILIKOFTAL® HTL 2/MPA is a methoxy-functional silicone polyester resin

TEGO® AddBond 2220 improves flexibility and adhesion of solvent borne coatings. This soft polyester shows very good compatibility in non-polar formulations.

SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin