Products

EBECRYL® 6203 is used in radiation-curable coatings, solder resists, and marking inks. It features excellent adhesion, good hardness, heat resistance, and medium viscosity. The product functions as a binder and resin in CASE ingredients.

EBECRYL® 629 is an acrylated epoxy novolac diluted with the reactive diluents trimethylolpropane triacrylate (TMPTA) and hydroxyethyl methacrylate (HEMA). When cured via ultraviolet light (UV) or electron beam (EB), EBECRYL® 629 exhibits high surface hardness, good heat resistance, low shrinkage, and good adhesion to metal, particularly copper. This resin was specifically designed for UV cure solder resist applications.

HORDAPHOS MDB is an efficient EP/AW additive for aqueous metal working fluids and water-based fire-resistant hydraulic fluids (HFC, HFA-E).

DERTOL® 85 is a mixture of terpene alcohols and hydrocarbons. DERTOL® 85 is characterized by its high content in terpene alcohols, mainly terpineol isomers.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.

Wayncor™ 224 is a white non-refractive, corrosion inhibitive pigment used in protective coatings systems. It is compatible with a wide assortment of commercially available resin systems. It can provide an economic alternative to standard grade zinc phosphate. Performance can vary depending upon choice of resin system, but in general the use level would be between 3 - 10% total formula weight.

BONDERITE® L-CA PF 404 ACHESON (known as PF 404) is a blend of ultra-fine graphite particles dispersed in a water-extendible solution. Specifically designed for continuous casting, BONDERITE® L-CA PF 404 ACHESON (known as PF 404) provides excellent release, superior tooling protection and high temperature wetting characteristics on copper/bronze dam blocks. Its unique formulation minimizes gassing which compounds porosity levels. BONDERITE® L-CA PF 404 ACHESON (known as PF 404) does not build up and is easily washed from the dam block surface.

PARALOID™ B-44 100% Resin provides an outstanding combination of hardness, flexibility, and adhesion to various substrates. It also permits wider latitude in formulating in solvents that are suitable for specific applications. The resin is slightly softer and more flexible than PARALOID A-21 Solid Grade Thermoplastic Acrylic Resin and has excellent adhesion to various substrates.

RHOPLEX® WL-51 is ideal for high-performance waterborne finishes for coating plastic substrates, such as those used for business machines and office equipment. RHOPLEX® WL-51 is recommended for use on the following plastics: acrylonitrile/butadiene/styrene, polycarbonate, polyphenylene oxide, polyvinyl chloride, acrylic, polystyrene, high-impact polystyrene, polypropylene, and pre-treated thermoplastic polyolefin. RHOPLEX® WL-51 delivers an outstanding combination of application, durability, and appearance benefits that make it an excellent choice for demanding business and office applications.

Additin® RC 8213 is an ashless extreme pressure additive and metal deactivator designed for sulfur-rich refinery streams. It is compatible with copper, non-ferrous metals, and other metals. Suitable for compressor oils, gear oils, greases, hydraulic fluids, metalworking fluids, turbine oils, and crude oils.

Additin® RC 5800 is a water-soluble liquid containing sodium tolyltriazole, a corrosion inhibitor commonly used in recirculating cooling water systems, antifreeze, and metalworking fluids. It provides excellent corrosion inhibition and anti-freezing properties. It is also compatible with a variety of metals and is ideal for industrial applications requiring protection against corrosion in hydraulic and cooling systems.

PARALOID™ B-64 100% Resin can be dissolved in toluene, xylene, selected esters, acetone, and methyl ethyl ketone. PARALOID™ B-64 100% Resin is not soluble in most alcohols and aliphatic hydrocarbons as the sole solvent. Please contact your sales person for additional information about the solvent compatibility of PARALOID™ B-64 100% Resin. It is well suited for a variety of applications, including treated metal, copper, zinc, brass, treated aluminum, concrete floors, and certain plastics.

Additin® RC 3662 is a tricresyl phosphate for reduction of friction and wear in applications where high loads cause boundary lubrication conditions. Used in high performance fluids including mineral oil and synthetic base fluids and more difficult base fluids such as polyalphaolefins. Triaryl phosphates of this type are widely known as effective ashless antiwear and mild extreme pressure additives for lubricants and functional fluids.