Products

K-FLEX® DP is dipropylene glycol dibenzoate, which is one of the oldest members of the benzoate plasticizer family and one of the most versatile polar, high solvating plasticizers still commercially available. K-FLEX® DP is compatible with a wide range of polar polymers and rubbers and is often blended with other plasticizers such as K-FLEX® DP (diethylene glycol dibenzoate).

D.E.H.® 445L cycloaliphatic polyamine hardener is used as curing agent for epoxy resin. It offers low tendency to yellowing when exposed to UV irradiation, low viscosity and long pot life.

D.E.H.® 39 Epoxy Curing Agent is a liquid cycloaliphatic polyamine curing agent. D.E.H.® 39 Resin is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP). D.E.H.® 39 Curing Agent provides a short pot-life and cures in minutes with liquid epoxy resins. Similar in application to D.E.H. 20, 24, 26 and 29 Epoxy Curing Agents, D.E.H.® 39 Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 39 Curing Agent is used for casting, potting and encapsulation. D.E.H.® 39 Curing Agent is often used for epoxy composite materials.

D.E.H.® 502 aliphatic amine hardener is used as curing agent for epoxy resins. It provides good solvent and chemical resistance and offers good low temperature cure.

AP 1001 LV is a low viscosity, reactive, mannich-based amine hardener for epoxy resins based lacquers and coatings.

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

WANAMINE™ IPDA is a curing agent used in resin manufacturing. It is compatible with epoxies, polyamides, and polyamines, and functions as a curing agent in plastics and elastomers.

Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYEO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic and aromatic hydrocarbons.

AP1405 is Low viscosity, reactive, mannish-based amine hardener for epoxy resins based lacquers and coatings.

AP 5645 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

P-™10 Acid Low color castor oil fatty acids is castor oil fatty acids, derived from pure castor oil. P-™10 Acid Low color castor oil fatty acids is the building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

ZHENGDA® ZM-160 is a 600 molecular weight polypropylene glycol monoamine, with methoxyethyl termination at the other end. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 9/1. Polyetheramines of this type are useful in a variety of polymers because of the flexibility imparted by polyether groups.

Exolit® AP 422 A is a fine-particle ammonium polyphosphate (phase II) with less than 0.1% melamine. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic, non-flammable, and classified as SVHC-free under current regulations.

CYMEL® 327 resin is a methylated high imino melamine crosslinker supplied in isobutanol. CYMEL® 327 resin is very reactive and has a tendency towards selfcondensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. Its major advantage relative to other high imino resins is its potential to lower VOC in high solids formulations.

AP1028 is medium viscosity, reactive, phenalkamine hardener for epoxy resin based lacquers and coatings.