Products

Wayncor™ 213 is a general purpose corrosion inhibitive pigment which demonstrates good stability and corrosion resistance in a wide variety of systems. Typical use level is between 3 - 7% total formula weight.

Wayncor™ 226 is a premium multi-component corrosion inhibitor pigment that comprises distinctly different inhibitive species to provide a high degree of corrosion protection on ferrous substrates. Although versatile it is highly recommended for water based acrylic primers where a high degree of corrosion resistance is required. Typical use level is between 3 - 7% total formula weight.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 - 7 % total formula weight.

MAINCOTE™ PR-71 is used for all protective coating applications, the first need is for adhesion to and passivation of the substrate. In the past, difficult-to-adhere-to substrates were often treated with a vinyl wash primer to passivate the substrate and provide adhesion for subsequent coats. These vinyl wash primers are increasingly difficult to use as they are very low in solids, high in VOC, and contain toxic pigments. In contrast, MAINCOTE™ PR-71 Waterborne Acrylic Resin allows the coatings manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer.

Hybricor™ 204S is a pigment grade hybrid corrosion inhibitor, effective in primer applications intended for cast and structural aluminum protection. It can easily be incorporated into the coating using a high speed disperser. Hybricor™ 204S has a particle size of 7 Hegman which permits its use in both primer and DTM applications.

Wayncor™ 224 is a white non-refractive, corrosion inhibitive pigment used in protective coatings systems. It is compatible with a wide assortment of commercially available resin systems. It can provide an economic alternative to standard grade zinc phosphate. Performance can vary depending upon choice of resin system, but in general the use level would be between 3 - 10% total formula weight.

Wayncor™ 205 is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 - 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncor™ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncor™ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.

Wayncor™ 229 is an effective multi-component, multi-phase synergistic corrosion inhibitor pigment. It is a chrome free product, and is compatible with all commercially available aqueous and solvent based resin systems. The recommended loading levels for water based systems and solvent based systems from 3 - 7% total formula weight.

Wayncor™ 214 is an effective corrosion inhibitive pigment designed for alkyds and other solvent based systems. Typical use level is 3 - 7% total formula weight.

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.

MAINCOTE™ 36 Emulsion is an aqueous hydrophobic acrylic copolymer that can be used as an anti-corrosive primer for metal substrates. Primers based on MAINCOTE™ 36 Emulsion have excellent adhesion to most metal substrates, including carbon steel, aluminum, and galvanized steel. MAINCOTE™ 36 Emulsion also has excellent water resistance and good corrosion resistance making it a good primer choice for industrial maintenance, DIY metal primers, and is also suitable for shop applications on structural steel where adhesion, water, and corrosion resistance are key requirements.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

TEGO® AddBond DS 1300 improves adhesion of water borne coatings on steel, galvanized steel, aluminum, and plastics.

TEGO® AddBond LTW-B improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.