Products

EBECRYL® 4849 is an aromatic urethane diacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 4849 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and abrasion resistance.

AP 5635 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water.

TEGO® Addbond LTK improves adhesion and flexibility of solvent borne coatings on steel and galvanized steel.

BONDERITE® L-AD M 200 (known as MOLYDAG 200) is an extremely stable suspension of uniform, microscopic molybdenum disulfide particles in a highly refined petroleum oil concentrate. As an additive, BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200) substantially improves the extreme pressure, anti-wear and anti-friction capabilities of oils and greases and provides reliable lubrication in those demanding applications that approach boundary lubrication conditions.

Rilsan® 7413 BLUE MAC ES is applied by spray and is compatible with metal substrates and surfaces.

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.

Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.

Additin® RC 5666 A is a single-ingredient chemical blend used as a base stock and oil. It is compatible with metal and stainless steel substrates. The product is designed for various lubricating applications.

Polycin® T-400 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® T-400 will impart higher hardness and strength, and as a reactive diluent, Polycin® T-400 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

D.E.H.® 20 Epoxy Curing Agent is an economical, liquid diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. D.E.H.® 20 Epoxy Curing Agent is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 20 Epoxy Curing Agent is used for casting, potting and encapsulation.

AP 5601 is low Viscosity, reactive polyamido amine hardener for epoxy resins based coatings.

EBECRYL® 4141 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal.

EBECRYL® 4397 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. EBECRYL® 4397 exhibits greater flexibility in comparison to other isocyanate functional urethane acrylates such as EBECRYL 4150(1).

TEGO® AddBond LTW improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.