Products

WANNATE® TL-75E is an aromatic polyisocyanate based on toluene diisocyanate. It is a colorless or pale yellow liquid with a solvent-like odor with approx. 75 % in ethyl acetate.

EBECRYL® MAES is a versatile monofunctional acrylate monomer that polymerizes under free radical initiation. This acid-functional diluent is compatible with various acrylated resins used in radiation curing applications, and offers superior purity, odor, and lower volatility when compared to β-CEA. It enhances adhesion on metallic, plastic, and paper substrates and is ideal for use in clear coats, inks, laminates, pressuresensitive adhesives, and other UV-curable systems. Additionally, EBECRYL® MAES is suitable for developable etch and plate photoresist formulations.

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings.

WANNATE® HB-200 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

WANNATE® HTBL-175S is a MEKO blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 25% Solvent naphtha 100, colorless to slightly yellowish clear liquid.

WANNATE® HT-500 is a solvent free, low viscosity aliphatic polyisoyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

WANNATE® HT-90B is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% n-butyl acetate, colorless to slightly yellowish clear liquid.

WANNATE® HB-75BX is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 12.5% n-butyl acetate and 12.5% xylene, colorless to slightly yellowish clear liquid.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated and methacrylated resins.

WANNATE® HB-100 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 25% n-butyl acetate, colorless to slightly yellowish clear liquid.

WANNATE® HT-90BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% of n-butyl acetate and solvent naphtha 100 (1:1) mixed solvent, colorless to slightly yellowish clear liquid.

WANNATE® HT-80BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 20% n-butyl acetate and solvent naphtha 100 (1:1), colorless to slightly yellowish clear liquid.

EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. EBECRYL® LED 03 when combined with an appropriate photoinitiator system transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED03 exhibit a low odor after UV or EB curing.

WANNATE® IT-170BS dissolved Aromatic 100 and n-butyl acetate (2:1), can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Based on its high hardness, it is normally mixed with WANNATE® HT series.