Products

ZHENGDA® ZM-160 is a 600 molecular weight polypropylene glycol monoamine, with methoxyethyl termination at the other end. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 9/1. Polyetheramines of this type are useful in a variety of polymers because of the flexibility imparted by polyether groups.

CALCIUM STEARATE CHP GRANULAR 5868 is a high bulk density, free flowing granular powder.

GENIOPLAST® PELLET S is a pelletized silicone gum formulation with an outstanding high loading of ultrahigh molecular weight siloxane polymer.

CALCIUM STEARATE RSN POWDER 5870 is a medium bulk density, fine white powder.

WANAMINE™ H12MDA is a cycloaliphatic amine used as a curing agent in case ingredients and plastics and elastomers.

BAYPLAST® YELLOW G GRAN is a monoazo ca-pigment.

VERSAL YELLOW 5GN 01 is a pigment compatible with acrylonitrile butadiene styrene (ABS), plasticized polyvinyl chloride (PVC-P), polyamides, polyethylene terephthalate (PET), polyolefins, polypropylenes (PP), polystyrenes (PS), and polyurethanes (PU) used in plastics and elastomers.

D.E.R.® 660-B80 Epoxy Resin Solution is a semi-solid reaction product of epichlorohydrin and bisphenol-A dissolved in n-butanol. D.E.R.® 660-B80 Epoxy Resin Solution is an intermediate epoxy equivalent weight epoxy resin dissolved in butanol, and is used mainly in adhesives and protective coatings, or as a modifier for other epoxy resins to improve impact strength, extensibility, and adhesion. This epoxy resin solution can provide the high solids and chemical resistance of liquid epoxy resins combined with the adhesion, flexibility, excellent mechanical properties, and fast cure of higher molecular weight 1-type solid epoxy resin solutions. D.E.R.® 660-B80 Epoxy Resin can form the basis of many two-component coating systems with either polyamine, polyamide or polyamidoamine curing agents to provide high quality coatings which are resistant to a number of chemical reagents. D.E.R.® 660-B80 Epoxy Resin Solution is ideal for adhesives and medium to heavy duty coatings such as those used for ship hulls, marine paints, tank linings, and industrial maintenance coatings.

OREVAC® 18302N is a maleic anhydride grafted linear low density polyethylene.

D.E.R.® 660-X80 Epoxy Resin Solution is a semi-solid reaction product of epichlorohydrin and bisphenol A in a xylene solution. D.E.R.® 660-X80 Epoxy Resin is an intermediate molecular weight epoxy resin in a xylene solution developed for use in high solids/high build coating formulations. This epoxy resin solution enables the formulation of systems combining the high solids and chemical resistance of liquid epoxy resins with the outstanding adhesion, flexibility and fast cure of higher molecular weight solid epoxy resin. D.E.R.® 660-X80 Epoxy Resin can form the basis of a two-component coating system with either polyamine, polyamide or polyamidoamine curing agents to provide high quality coatings which are resistant to a number of chemical reagents. These coatings also exhibit the excellent mechanical properties normally associated with epoxy resin systems. D.E.R.® 660-X80 Resin is ideal for medium to heavy duty coatings, such as ship hulls, marine paints, tank linings and industrial maintenance coatings.

OREVAC® 18722 is a maleic anhydride grafted polypropylene.

Aluminum Stearate 1032 is a medium bulk density, white powder.

MAH SEBS DZ®-901 is a kind of polar thermoplastic elastomer in SBCs, with great compatibility, good elasticity in low temperature.

Stabaxol® I Powder is an active antihydrolysis agent for polyester polyurethanes produced by hot casting like e. g. PET, PBT, TPE, PLA, TPU and millable Urethane rubber. Polymers with amide groups (PA) can be protected against hydrolysis with Stabaxol® I Powder, too. Stabaxol® I Powder is very suitable for extrusion of monofilaments. Due to its powder form it can be handled easier than Stabaxol® I or Stabaxol® I LF.