Products

Exolit® OP 950 is a white granular powder based on an organic phosphinate. The product is not hygroscopic and slightly soluble both in water and in common organic solvents. It melts at 200°C.

Staybelite® Resin is gum rosin that has been partially hydrogenated via a catalytic process. It is a pale, thermoplastic, acidic resin, Hydrogenation makes this resin highly resistant to oxidation and discoloration and to changes in solubility characteristics, when it is exposed to air and heat. In these respects, it is greatly superior to ordinary non- hydrogenated rosins.

PolyJet 502SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

PolyJet 502 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

BONDERITE® L-GP M 210 is a colloidal dispersion of molybdenum disulfide in alcohol. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) offers excellent extreme-pressure lubrication in a resin-bonded system that air dries in five to ten minutes. The material is easily applied by standard spray, brush, or dip methods to all substrates not affected by the fluid component. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) is supplied as a concentrate to be used as is or diluted in appropriate solvent for final application.

GENIOPLAST® PELLET 345 is a soft, highly transparent, thermoplastic elastomeric silicone copolymer.

Exolit® AP 435 is a fine particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

GENIOPLAST® FLUID 220 is a clear, colorless and odorless liquid.

GENIOPLAST® FLUID FR is a high viscosity silicone formulation consisting of a linear silicone fluid and a silicone resin dissolved in the fluid. The resulting formulation is clear and colorless.

GENIOPLAST® PELLET P PLUS is a pelletized silicone gum formulation with an outstanding high loading of ultrahigh molecular weight siloxane polymer.

BONDERITE® L-GP 154 RFU a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long-wearing lubrication without redesign of component dimensions. Supplied in Ready-For-Use form, coatings are easily applied during manufacture or assembly by standard spray techniques. BONDERITE L-GP 154 RFU ACHESON (known as DAG 154 RFU) is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics.

GENIOPLAST® PELLET S US AA is a pelletized silicone gum formulation with an outstanding high loading of ultrahigh molecular weight (uhmw) siloxane polymer.

Exolit® OP 945 is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 um. The product is not hygroscopic and it is insoluble in water an common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 945 can easily be dispersed in solvents like acetone or MEK.

BONDERITE® S-FN 109B is one of a series of coatings designed to provide controlled electrical properties. BONDERITE® S-FN 109B is a dispersion of finely divided graphite in a thermoplastic resin. This product rapidly air dries to form a flexible conductive coating. It is designed to be applied by typical spray or printing techniques. The flexibility of this product makes it an excellent choice for coating plastic as well as metal. BONDERITE® S-FN 109B is tested for 11 elemental impurities. The high purity level of BONDERITE® S-FN 109B makes for a highly conductive, flexible coating.