Products

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

XIBOND® 130 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

Orient Black® N762 is a low surface area, low structure semi reinforcing soft grade carbon black providing high resilience and excellent processing properties.

Aluminum Stearate 1032 is a medium bulk density, white powder.

AEROSIL® R 805 Coating is a fumed silica after-treated with organosilane. It providesutmost transparency.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

MKOREZ® MK-100 is made from highly purified monomers such as styrene and/or alpha methyl styrene. This pureness of raw materiaals can make the resin has water white color with high aromaticity than that of conventional hydrogenated resins at the same time. This has good heat stability and excellent potential as a modifier can control set time and transparency of EVA based hot melt adhesives. This can be also used in other kinds of adhesive like SBCs based hot melts.

PEBAX® 7233 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 7233 SP 01 has been developed to be heat and UV resistant.

Bermocoll® EHM MAX is a non-ionic, hydrophobically modified methyl ethyl hydroxyethyl cellulose ether that improves the rheological properties of water-based paints.

MAGNESIUM STEARATE AV VEG - US is a high bulk density free flowing granules.

TERSPERSE® 2020 is a sodium alkylnaphthalene sulfonate formaldehyde condensate.

H.B. Fuller® HM-1580 is a ready-to-use adhesive known for chemical resistance, oil and solvent resistance, good adhesion, medium open time, and excellent performance at both high and low temperatures.

CIMTUFF® 9100 Talc 9103 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTUFF® 9100 Talc 9103 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTUFF® 9100 Talc 9103 is are platy, hydrophobic, non-abrasive and chemically inert.

Bermocoll® E 481 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products.

PEBAX® 2533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 2533 SA 01 is specially designed to food uses. Its chemical structure also enables the absorption and the controlled release of volatile molecules