Products

Baerolub® FTA VEG is a relatively high bulk density, free flowing flake (SMS) or prill (SP) forms.

Baerolub® FTA Veg Prill is a relatively high bulk density, free flowing prills.

D.E.R.® 664UE Solid Epoxy Resin is a medium molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 664UE Solid Epoxy Resin is used mainly in powder coatings. It can be incorporated in both decorative and functional coatings to provide improved viscosity characteristics and greater flexibility. D.E.R.® 664UE Resin can also be used for epoxy esters with an appropriate catalyst added to the formulation.

D.E.R.® 661 is a standard, low molecular weight, solid epoxy resin designed for use in applications where cure must be achieved at room temperature. D.E.R.® 661 Solid Epoxy Resin can be formulated in solution to yield an excellent base for the formulation of high quality chemical resistant coatings, when cured with polyamine or polyamide curing agents. D.E.R.® 661 Solid Epoxy Resin is also widely used for glass sizing applications. D.E.R.® 661 Epoxy Resin is available in various solutions, e.g. under the designation D.E.R. 671-X75 Epoxy Resin Solution, a solution in xylene (75 wt%). The change in designation from D.E.R.® Epoxy Resin to D.E.R.® 671 Epoxy Resin in this designation reflects the slight difference in epoxy equivalent range in the solution form. D.E.R.® 661 Solid Epoxy Resin can also be used as a complimentary epoxy resin in non-epoxy coating systems to improve resistance properties.

CRAYVALLAC® WN-1265 PR is an amide wax.

TALLOW FATTY ACID is a relatively high bulk density, free flowing flakes

D.E.R.® 6225 is a modified, low molecular weight, solid reaction product of epichlorohydrin and bisphenol A. D.E.R. 6225 Resin is a modified, low molecular weight, solid epoxy resin which has been developed mainly for use in powder coatings. It has been designed for applications where excellent flow out and high gloss are required such as automotive, appliance or general metal decorative coatings. D.E.R.® 6225 is also suitable for use in thin film applications.

D.E.R.® 664 HA functions as a binder and resin in CASE ingredients.

D.E.R.® 6155 Solid Epoxy Resin is a medium/high molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 6155 Solid Epoxy Resin is a high molecular weight solid epoxy resin designed primarily for use in powder coating formulations which require greater flexibility. D.E.R.® 6155 Solid Epoxy Resin can be used in combination with most curing agents for epoxy powder coatings systems with good results. To achieve maximum flexibility, curing with a linear phenolic hardener such as the D.E.H.® 80 Hardeners is recommended. D.E.R.® 6155 Solid Epoxy Resin can also be used in combination with other epoxy resins to obtaining specific processing or performance properties.

VANCRYL® 65 is a medium molecular weight solid acrylic resin that is soluble in alkaline water solutions. Ammonia or other bases may be used as neutralizing agents. Co-solvents such as isopropanol are not required in making the solution, thus facilitating the preparation of low VOC inks and coatings. VANCRYL® 65 provides outstanding properties for high-solids gravure inks and waterborne clear overprint varnishes. The lower viscosity characteristics in solution of VANCRYL 65 allow the preparation of high solids inks and coatings, where high gloss and rapid drying are essential. Coatings prepared with VANCRYL® 65 have high gloss, scuff resistance, hardness, and excellent resolubility. VANCRYL® 65 is compatible with most acrylic and maleic resins. VANCRYL® 65 is also effective as a protective colloid in the production of styrene acrylic copolymer emulsions.

D.E.R.® 667-20 is a high molecular weight "7-type" epoxy resin.

D.E.R.® 560 is a solid brominated epoxy resin.

Baerolub® L-MS is a glycerol ester and derivative used as both an internal lubricant and release agent in the processing of polyvinyl chloride (PVC). This product is particularly effective in controlling fusion during the processing of PVC, ensuring smooth operation and high-quality results. It serves as a lubricant and release agent, enhancing the processing of PVC materials.

D.E.R.® 6510-HT has been developed for high-performance, fusion bonded epoxy coatings withstanding high operating temperatures. This resin also offers excellent chemical and corrosion resistance coupled with the outstanding heat performance. D.E.R.® 6510-HT solid epoxy resin is a 2-functional epoxy resin which has been chemically modified to allow fusion bonded powder coating formulations to withstand operating temperatures up to 160°C. D.E.R.® 6510-HT solid epoxy resin enables fusion bonded binder systems to achieve an optimized balance of properties using commonly available, commercial crosslinkers and normal processing conditions. D.E.R.® 6510-HTsolid epoxy resin can be used in combination with standard and modified bisphenol A and novolac epoxy resins. This will help formulators to develop a powder coating system with the right balance of thermal and mechanical properties while still providing good corrosion resistance and chemical resistance.