Products

EBECRYL®1291 is a hexafunctional aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL®1291 exhibit high hardness, abrasion and solvent resistance.

EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. EBECRYL 657 provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL 436 or EBECRYL 438 to increase cure speed.

EBECRYL® 6603 is an aromatic urethane acrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 6603 cured by ultraviolet light (UV) or an electron beam (EB) feature good toughness, flexibility and abrasion resistance. EBECRYL® 6603 is useful as a modifier for harder resins such as epoxy acrylates.

EBECRYL® 7100 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7100 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7100 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7100 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7110 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7110 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® 740/40TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates.

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

EBECRYL®741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. It is designed for general purpose application on many treated plastic substrates. It can also be used as a let-down resin in combination with EBECRYL® epoxy acrylates, polyester acrylates and urethane acrylates.

EBECRYL® 80 is an amine modified polyether tetraacrylate that exhibits relatively low viscosity and exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 80 cured by UV or electron beam (EB) demonstrate high gloss, good solvent resistance and low residual odor. EBECRYL 80 is especially suited for fast curing UV overprint varnishes, and due to its low viscosity and good pigment wetting characteristics, is also recommended for UV flexo inks.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

EBECRYL® 81 is an amine modified polyether acrylate that exhibits very low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL 81 cured by UV or electron beam (EB) demonstrate high gloss and low residual odor. EBECRYL® 81 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.

EBECRYL® 810 is a polyester tetraacrylate that exhibits low viscosity and good cure response. Films of EBECRYL 810 cured by ultraviolet light (UV) or electron beam (EB) demonstrate surface hardness, chemical resistance and generally good adhesion. EBECRYL® 810 is particularly suited to application methods requiring low viscosity such as solventless spray and vacuum coating.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.