Products

BONDERITE® L-GP M 206 is a lubricant additive designed to provide extreme pressure and anti-wear properties to water-based lubricant systems. It can be applied by several methods to form tightly adherent films on metal surfaces once it has been diluted with water to achieve the desired solids content. Consisting of specially refined molybdenum disulfide in water, BONDERITE® L-GP M 206 ACHESON (known as MOLYDAG 206) exhibits excellent resistance to settling. It does not promote highly acidic properties normally associated with conventional slurries of MoS2 powder and water.

UCECOAT® 7200 is a novel energy curable solvent-free urethane acrylate in water developed for hardcoat applications. This urethane acrylate is highly reactive upon cure and exhibits high scratch and abrasion resistance after curing. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH neutralization) to increase solids content and/or hardness property.

TEGO® Foamex 8820 is an effective bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Freeof silicone, solvent, and mineraloil.

SILIKOTOP® E 900 is a binder and resin used in 2K coatings, protective coatings, solventborne coatings, and solventless and high solids coatings. It offers chipping resistance, high impact resistance, high viscosity, low VOC, and weather resistance.

TEGO® Foamex 823 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of compatibility and long term effectiveness.

BONDERITE® L-GP 2412 is a concentrated graphite lubricant and coating material specially formulated for demanding high temperature applications up to 900°F (482°C). High heat resistance plus the very low residue left by the fluid component make BONDERITE® L-GP 2412 ACHESON (known as DAG 2412) ideal for such applications as gasket coatings, foundry maintenance operations, and brazing and welding stop-off coatings. Gaskets seal effectively and release easily when pretreated with BONDERITE L-GP 2412 ACHESON (known as DAG 2412).

SURFYNOL® MD-20 is a very compatible molecular defoamer based on Gemini surfactant technology. Freeof siliconeand silica. Offers additional dynamic wetting properties.

RHOPLEX® WL-81, waterborne, acrylic polymer is specifically designed for the formulation of clear and pigmented ambient or forced-air-dry industrial lacquers. Coating systems based on this polymer are suitable for use on a variety of substrates and offer a number of key benefits currently provided by solvent borne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems.

BONDERITE® L-GP M 210 is a colloidal dispersion of molybdenum disulfide in alcohol. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) offers excellent extreme-pressure lubrication in a resin-bonded system that air dries in five to ten minutes. The material is easily applied by standard spray, brush, or dip methods to all substrates not affected by the fluid component. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) is supplied as a concentrate to be used as is or diluted in appropriate solvent for final application.

HP9078-Medium Oil Alkyd is a medium oil alkyd resin based on a combination of linseed oil and soybean oil. The solvent is VMandP naphtha. The main application for this resin is in the preparation of traffic alkyd paint but it can also be used in any application that requires fast set up and good durability.

Preventol® MP 400 D is a carbamate chemical mixture used in building and construction, fluids and lubricants, and industrial and assembly adhesives.

Preventol® ON Extra Preservative Solution is an aqueous, alkaline solution of 2-Phenylphenol.

TEGO® AIREX 920 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown.

TEGO® AIREX 944 shows excellent defoaming against both micro- and micro-foam. Suitable for a broad range of coating systems. Ideally suited for high-solid and 2K solvent-free formulations.