Products

Polycin® GR-160 is a 100% solids, castor oil based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-160 imparts medium hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and leveling.

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.

WANNATE® HTBL-175S is a MEKO blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 25% Solvent naphtha 100, colorless to slightly yellowish clear liquid.

WANNATE® HT-400 is used in paints and coatings as a binder and resin, hardener, intermediate, and thinner. It is compatible with polyacrylates, polyester polyols, and polyurethanes (PU).

PURMOL™ 4ST is a sodium (Na) type A zeolite with a pore size of approximately 4 Angstroms (0.4 nm). PURMOL™ 4ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate. With metal dust coatings we recommend the addition of 0.5% - 2% PURMOL™ 4ST powder.

EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as an adhesion promoter in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

BONDERITE® L-GP EB 020A ACHESON is one of a series of coatings designed to provide controlled electrical properties. BONDERITE® L-GP EB 020A ACHESON (known as DAG EB-020A) is a one-component thermosetting graphite coating of unusually high conductivity. BONDERITE® L-GP EB 020A ACHESON (known as DAG EB-020A) is water-based and particularly useful in solvent-prohibited areas. The electrical conductivity and corrosion protection properties of BONDERITE® L-GP EB 020A ACHESON (known as DAG EB-020A) make it suitable for alkaline battery applications where the current collector can requires protection. Easy and reliable spray application of BONDERITE® L-GP EB 020A ACHESON (known as DAG EB-020A) allows for maximized production speeds and economical usage which results in lower component costs. Battery shelf life and performance are maximized to provide the required longevity of the battery and results in customer satisfaction.

BONDERITE® M-MN LUBRITE 2 is a corrosion inhibitor used in 1K (one-component) coatings. It is compatible with iron, metal, and steel substrates, providing high oil absorption, scuff resistance, and preventing metal-to-metal contact. It also offers non-metallic properties for enhanced performance.

ROSHIELD™ 636 is a hard, styrene-acrylic polymer that offers one component, self-crosslinking technology for kitchen cabinets, for sealers and topcoats in molding formulations, and any interior board application. Coatings based on ROSHIELD 636 Emulsion exhibit outstanding mar, print, and block resistance without the limitation of pot life. The excellent color retention of ROSHIELD 636 Emulsion makes it an excellent choice for use over white and light colored basecoats. It offers very good ammonia resistance, is highly resistant to a wide range of stains and chemicals, and has unsurpassed humidity resistance.

MAINCOTE™ 36 Emulsion is an aqueous hydrophobic acrylic copolymer that can be used as an anti-corrosive primer for metal substrates. Primers based on MAINCOTE™ 36 Emulsion have excellent adhesion to most metal substrates, including carbon steel, aluminum, and galvanized steel. MAINCOTE™ 36 Emulsion also has excellent water resistance and good corrosion resistance making it a good primer choice for industrial maintenance, DIY metal primers, and is also suitable for shop applications on structural steel where adhesion, water, and corrosion resistance are key requirements.

RHOPLEX® WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) of RHOPLEX® WL-100 accommodates a broad range of formulation types and formulation process techniques, providing the formulator with a versatile binder for a variety of applications. Robustness, along with 50% weight solids, allows the formulator to achieve volume solids above conventional waterborne binders.

AEROSIL® R 208 Coating is a fumed silica after-treated with polydimethylsiloxane.

AEROSIL® R 812 S Coating is a fumed silica after-treated with HMDS.