Products

PURMOL™ 3ST Paste is made of Purmol molecular sieve and castor oil. It includes a synthetic 3A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). This allows for selective adsorption of molecules based on molecular size and polarity. In practice, Purmol adsorbs water but not solvents, resins, or pigments.

DURATRACK™ R-100 Emulsion is a specially designed all-acrylic resin for fast drying and high-performance traffic markings. The combination with DURATRACK™ AEH- 100 Acrylic-Epoxy Hybrid as a two-component waterborne coating system demonstrates to have excellent durability, aggregates retention, wear resistance and adhesion to road surfaces. In addition, it brings such benefits as long pot-life, ease of handling and application. The installation of DURATRACK™ coating system with equipment normally for typical waterborne traffic paint significantly reduces the total cost compared to other two-component coating systems. DURATRACK™ coating system is ideal for building high quality and large scale of green bike lane networks.

CRAYVALLAC® MT is used in solventborne coatings, as well as solventless and high solids coatings. It features anti-settling, high thixotropy, recoatability, and sag resistance. The product functions as a rheology modifier in CASE ingredients.

Wayncor™ 240 is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 - 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.

Polycin® GR-160 is a 100% solids, castor oil based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-160 imparts medium hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and leveling.

Polycin® M-280 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® M-280 will impart higher hardness and strength, and as a reactive diluent, Polycin® M-280 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

Polycin® GR-80 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-80 imparts low hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and leveling.

CRAYVALLAC® ANTISETTLE CVP is used in caulks, solventborne coatings, and greases. It features anti-settling, good leveling, high shear thinning, high thixotropy, recoatability, and sag resistance. The product functions as a rheology modifier in CASE ingredients.

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.

Polycin® T-400 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® T-400 will impart higher hardness and strength, and as a reactive diluent, Polycin® T-400 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

Polycin® GR-50 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-50 imparts low hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

WANNATE® HB-200 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

WANNATE® IT-100 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. WANNATE® IT-100 is a solvent-free material, supplied as pellets. This cycloaliphatic polyisocyanate is light-stable and non-yellowing. It has especially been developed as an isocyanate crosslinking agent for 2K PUR coatings or adhesives. It is also supplied as 70 pbw. solutions in various solvents.