Visit palmerholland.com
All Categories
All Categories
Products
4879
Brands
339
Documents
10070
Technologies
Markets
category
Plastics
Products
Palmer Holland, Inc.
Plastics
Browse
Applications
Show All 1 Categories
Polymer Additives
Polymer Additives
Applications
Principal
Country of Origin
Product Functions
Processing & Application Methods
All Filters
19 Products
found on Palmer Holland, Inc.
in
Plastics
Relevance
Palmer Holland, Inc.
Wayncor™ 240
Principal:
WPC Technologies
Chemical Family:
Molybdates, Zinc & Zinc Compounds
Features:
Corrosion Inhibition, Corrosion Resistance, Flash Rust Resistance, Good Chemical Stability, Good Heat Stability, Good UV Stability, High Performance, Narrow Particle Size Distribution
Wayncor™ 240 is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 - 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.
Palmer Holland, Inc.
PURMOL™ 3ST
Principal:
Zeochem LLC
Chemical Family:
Zeolites
Labeling Claims:
Conflict Minerals-free
Features:
Excellent Dispersion Properties, Good Absorption
PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.
Palmer Holland, Inc.
WANNATE® HB-200
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, Lightfastness, Weather Resistance
WANNATE® HB-200 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
WANNATE® HT-500
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Labeling Claims:
Not Listed In California Proposition 65, Solvent-free
Features:
Color Retention, Good Mechanical Properties, High Gloss, Low Viscosity
WANNATE® HT-500 is a solvent free, low viscosity aliphatic polyisoyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
WANNATE® HT-90B
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, Lightfastness, Weather Resistance
WANNATE® HT-90B is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% n-butyl acetate, colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
WANNATE® HB-100
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Labeling Claims:
Not Listed In California Proposition 65
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Mechanical Properties, Weather Resistance
WANNATE® HB-100 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 25% n-butyl acetate, colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
WANNATE® HT-90BS
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates, Isocyanates
Labeling Claims:
Not Listed In California Proposition 65
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, Lightfastness, Weather Resistance
WANNATE® HT-90BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% of n-butyl acetate and solvent naphtha 100 (1:1) mixed solvent, colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
WANNATE® HT-80BS
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, Lightfastness, Weather Resistance
WANNATE® HT-80BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 20% n-butyl acetate and solvent naphtha 100 (1:1), colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
WANNATE® HT-100
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates, Isocyanates
Labeling Claims:
Not Listed In California Proposition 65
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, Lightfastness, Weather Resistance
WANNATE® HT-100 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
WANNATE® HT-790B
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Labeling Claims:
Not Listed In California Proposition 65
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, Lightfastness, Weather Resistance
WANNATE® HT-790B is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% n-butyl acetate, colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
PURMOL™ 4ST
Principal:
Zeochem LLC
Chemical Family:
Zeolites
Labeling Claims:
Conflict Minerals-free
Features:
Excellent Dispersion Properties, Good Absorption
PURMOL™ 4ST is a sodium (Na) type A zeolite with a pore size of approximately 4 Angstroms (0.4 nm). PURMOL™ 4ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate. With metal dust coatings we recommend the addition of 0.5% - 2% PURMOL™ 4ST powder.
Palmer Holland, Inc.
WANNATE® HT-300
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Labeling Claims:
Low VOC, Not Listed In California Proposition 65
Features:
Chemical Resistance, Excellent Gloss Retention, Good Compatibility, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, High Flexibility, Improved Pot Life, Lightfastness, Weather Resistance
WANNATE® HT-300 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
Dynasylan® HYDROSIL 2909
Principal:
Evonik Corporation Silanes
RTU Product Type:
Primer
Chemical Family:
Alkoxysilanes
Labeling Claims:
Non-Flammable, Not Listed In California Proposition 65
Features:
Corrosion Resistance, Excellent Substrate Adhesion, Good Impact Strength, Good Mechanical Properties, Good Moisture Resistance, High Impact Strength, High Mechanical Properties, High Modulus, High Modulus of Elasticity, High Tensile Strength, Improved Adhesion, Improved Flexural Strength, Improves Adhesion, Improves Filler Dispersibility, Moisture Resistance, Water-based
Dynasylan® HYDROSIL 2909 functions as a surface modifier, coupling agent, and crosslinking agent in industrial additives.
Palmer Holland, Inc.
WANNATE® HB-75B
Principal:
Wanhua Chemical Co
Chemical Family:
Diisocyanates
Labeling Claims:
Not Listed In California Proposition 65
Features:
Chemical Resistance, Excellent Gloss Retention, Good Gloss Retention, Good Lightfastness, Good Mechanical Properties, Lightfastness, Weather Resistance
WANNATE® HB-75B is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 25% n-butyl acetate, colorless to slightly yellowish clear liquid.
Palmer Holland, Inc.
ACEMATT® HK 450
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free
Features:
High Efficiency, Low Sedimentation, Low Sheen, Low Viscosity, Matting, Transparent
ACEMATT® HK 450 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.
Show
15
of 19 results
1
2
