Products

WHT-6190A is polyester-based solvent based adhesive, supplied in form of white pellets with the characteristic of low viscosity, very fast crystallization rate, and good adhesion strength to PVC, PU, fabric and genuine leather.

GENIOPLAST® PELLET S is a pelletized silicone gum formulation with an outstanding high loading of ultrahigh molecular weight siloxane polymer.

PEBAX® 5533 SN 70 BLACK is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This black colored grade offers the highest quality and electrostatic discharge (ESD) performance. It is used in sport and consumer applications, especially when conductivity is required.

Europrene® SOL T 6414 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 40 % wt and diblock content is 22%. A non staining antioxidant system is added during the production process.

Europrene® SOL T 6302 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 30 % wt. A non staining antioxidant system is added during the production process.

Europrene® SOL T 177 C is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 50 % wt. The polymer is extended with a clear paraffinic oil (40 phr). A non staining, TNPP free antioxidant system is added during the production process.

Europrene® K SOL 1205 is a solution styrene butadiene partial block copolymer, polymerized using an alkyl lithium catalyst at the Yeosu production facility in Korea. A non staining, BHT and TNPP free antioxidant system is added during the production process.

Europrene® SOL T 166 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 30 % wt. A non staining antioxidant system is added during the production process.

Europrene® SOL T 172 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt. The polymer is extended with paraffinic oil (45 phr). A non staining, TNPP free antioxidant system is added during the production process.

Pebax® 3533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.

PEBAX® 7233 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 7233 SP 01 has been developed to be heat and UV resistant.

PEBAX® 5533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 5533 SP 01 has been developed to be heat and UV resistant.

HIKOREZ® A-1100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking.

PEBAX® Rnew® 72R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. PEBAX® Rnew® 72R53 SP 01 has been developed to be heat and UV resistant.

PEBAX® Rnew® 70R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. PEBAX® Rnew® 70R53 SP 01 has been developed to be heat and UV resistant.