Products

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

EBECRYL® MAES is a versatile monofunctional acrylate monomer that polymerizes under free radical initiation. This acid-functional diluent is compatible with various acrylated resins used in radiation curing applications, and offers superior purity, odor, and lower volatility when compared to β-CEA. It enhances adhesion on metallic, plastic, and paper substrates and is ideal for use in clear coats, inks, laminates, pressuresensitive adhesives, and other UV-curable systems. Additionally, EBECRYL® MAES is suitable for developable etch and plate photoresist formulations.

Crestapol® 1212 is a resin, binder, and matrix material that offers excellent toughness, low viscosity, non-post cure, and rapid cure response. It is used in composite materials.

TRIGLYCIDYL ISOCYANURATE JF-77C is an isocyanurate-based crystalline polyepoxide compound, its molecular weight is 297 (CAS Number: 2451-62-9), and it owns good heat resistance, weather resistance, adhesive, and high-temperature performance.

D.E.H.® 29 Epoxy Curing Agent is an economical, liquid, complex mixture of linear, branched and cyclic ethylene amines. D.E.H.® 29 Epoxy Curing Agent offers more flexibility versus DETA,TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits,two-pack adhesives, and other applications where color is not a limitation. In adhesives,D.E.H.® 29 Curing Agent yields much higher peel strength than DETA or TETA at comparable gel times and lower cost.

D.E.H.® 20 Epoxy Curing Agent is an economical, liquid diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. D.E.H.® 20 Epoxy Curing Agent is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 20 Epoxy Curing Agent is used for casting, potting and encapsulation.

CRYSTIC® 199 is an isophthalic polyester resin. It is recommended for use in high performance applications, such as the aircraft industry, where superior thermal and electrical properties are required. Fully cured laminates made with Crystic® 199 have excellent chemical and heat resistance. They can withstand long periods (1 year) at temperatures up to 150°C, and shorter periods at temperatures up to 200°C, with no serious loss of properties.

D.E.H.® 24 Epoxy Curing Agent is an economical liquid aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 20 Epoxy Curing Agent, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 24 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 24 Epoxy Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 58 Epoxy Curing Agent is a low viscosity accelerated aliphatic polyamine curing agent.

D.E.H.® 26 Curing Agent is an economical liquid aliphatic polyamine hardener, tetraethylenepentamine (TEPA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 24 Epoxy Curing Agent in application, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 26 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 26 Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 39 Epoxy Curing Agent is a liquid cycloaliphatic polyamine curing agent. D.E.H.® 39 Resin is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP). D.E.H.® 39 Curing Agent provides a short pot-life and cures in minutes with liquid epoxy resins. Similar in application to D.E.H. 20, 24, 26 and 29 Epoxy Curing Agents, D.E.H.® 39 Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 39 Curing Agent is used for casting, potting and encapsulation. D.E.H.® 39 Curing Agent is often used for epoxy composite materials.

TRIGLYCIDYL ISOCYANURATE JF-77B is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance,weather resistance,adhesive and high temperature performance.

TRIGLYCIDYL ISOCYANURATE JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77D is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297, it owns good heat resistance,weather resistance,adhesive and high temperature performance.

LOTADER® AX8840 is a random ethylene-glycidyl methacrylate copolymer. Glycidyl methacrylate provides reactivity (versus OH, COOH and NH2 groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8840 is compatible with LDPE in all proportions, and with almost all other ethylene copolymers. LOTADER® AX8840 exhibits good adhesion on PET, PBT, PPS, metal, paper, glass. Due to its reactivity induced by the glycidyl methacrylate, LOTADER® AX8840 can be used as a compatibiliser for polyesters/polyolefins blends and as an adhesive for some laminate structures (polyolefins/polyesters, polyolefins/PPS etc.).