Products

Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access.

KRONOS® 2310 has outstanding optical properties and very high weather resistance in coatings.

Exolit® OP 1230 is a white, fine grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents. Exolit® OP flame retardants for polyamides are all based on aluminum diethyl-phosphinate (= DEPAL). The pure substance DEPAL is sold as Exolit OP 1230 and in combination with synergists as Exolit® OP 13xx types. Exolit® OP 1230 is the first non-halogenated flame retardant which can withstand the demanding requirements of this high end segment of engineering plastics.

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

CARPOL® SPA-530 is a sucrose amine-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 5.5 and a typical hydroxyl number of 530. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. In addition, CARPOL® SPA-530 contains amine and therefore is autocatalytic. This allows the formulator to use less catalyst while achieving the same reactivity seen in other neutral rigid polyols.

Exolit® RP 6520 is a brown-red paste, and is a thixotropic blend of castor oil with stabilised, microencapsulated red phosphorus. The paste form allows safe and simple handling and thus processing is made easier. The thixotropic nature of this concentrate hinders the sedimentation process and simplifies the re-homogenisation after long storage periods.

D.E.R.® 383 liquid epoxy resin is a reaction product of epichlorohydrin and Bisphenol A.

Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable.

Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 935 can easily be dispersed in solvents like acetone or MEK.

Korea PTG 1,4-Butanediol is a low-viscosity intermediate used in chemical and polymer synthesis for applications including castable polyurethane, copolyester ether thermoplastic elastomers, gamma-butyrolactone, N-methyl-2-pyrrolidone, N-vinyl-2-pyrrolidone copolymers, polybutylene terephthalate, reaction injection moldings, tetrahydrofurans, and thermoplastic polyurethane.

CARPOL® GP-5171 is a glycerin-initiated polyether polyol. The resulting material has a nominal functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 71% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include flexible foam, however, CARPOL® GP-5171 may also be included as a component in other urethane products and applications.

CARPOL® PGP-1000 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-1000 has a functionality of two and an average molecular weight of 1000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-1000 may also be included as a component in other urethane products and formulations.

AEROSIL® R 202 is a fumed silica surface-treated with polydimethylsiloxane with very good thickening properties.

CARPOL® GP-5171-60 Polyol is a glycerin-initiated polyether polyol. The resulting material has a nominal functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 71% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include flexible foam, however, CARPOL® GP-5171-60 Polyol may also be included as a component in other urethane products and applications.

CARPOL® PGP-4000 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-4000 may also be included as a component in other urethane products and formulations.