Products

CRAYVALLAC® ANTISETTLE CVP is used in caulks, solventborne coatings, and greases. It features anti-settling, good leveling, high shear thinning, high thixotropy, recoatability, and sag resistance. The product functions as a rheology modifier in CASE ingredients.

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

CARPOL® GP-6015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an antioxidant package tailored for this type of market.

Vorite® 125 has been polymerized by a unique process, which imparts excellent thermal and viscosity stability. The Vorite® oils are polymeric plasticizers for cellulosics and elastomers in adhesives, sealants, gasket cements and belt dressings. They aid in plasticizing the reactants (polyol) for flexible urethane foams and elastomers. Other uses include lacquers, marking inks and plug valve lubricants.

SUKOREZ® SU-110 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

CIMTALC® 7 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTALC® 7 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTALC® 7 is are platy, hydrophobic, non-abrasive and chemically inert.

KRONOS® 2360 is suitable for the highest demands on the weather resistance of coatings and plastics.

Polyfill 402SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

CIMBAR XF functions as a filler and pigment in plastics and elastomers.

EVATANE® 28-150 is a random ethylene-vinyl acetate copolymer.

Exolit® AP 428 is a fine-particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable. Exolit® AP 428 differs from most other commercial products in the following ways, greatly reduced solubility in water lower viscosity in aqueous suspensions, lower viscosity in PU polyol suspensions.

Polyfill 204 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

KRONOS® 2160 is used for maximum durability in coatings.