Products

TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect.

CRAYVALLAC® PA3 X 20 is used in solventborne coatings, top coats, varnishes, and wood coatings. It is compatible with acrylics, alkyds, nitrocellulose, and polyurethanes (PU) and is suitable for wood substrates.

HP1152 Soya Oil Alkyd is a low viscosity soya alkyd. It is formulated for use in ink vehicles and coatings that require improved pigment wetting. HP1152 - Soya Oil Alkyd can be used to improve the flow and reduce the viscosity of varnishes and inks, while minimising the need for solvents or ink oils. It can also be used to fortify latex paint, and increase the non-volatile content of conventional alkyd paints to improve their VOC compliance.

HECTGEL RDS is a modified synthetic hectorite. It can hydrate and swell in the water to form the colorless and transparent colloid with low viscosity. When its concentration in water is 10%, it can still keep a good fluidity for a long period.

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water.

AEROSIL® 380 is a hydrophilicfumed silica with a specificsurfacearea of 380 m²/g.

AEROSIL® R 972 RHE Coating is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is easytodisperseand suitablefor a broad rangeof applications.

EBECRYL® 83 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL 83 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.

VANCRYL® 960 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 960 is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 960 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

VANCRYL® 965 emulsion is a very low glass transition temperature acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 965 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 965 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 965 can be used as the backbone of printing inks and overprint coatings where various COF or slide resistance requirements are needed, from a range of 0.25 to 0.45.

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

AEROSIL® R 976 S is a hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane).

EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. EBECRYL 657 provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL 436 or EBECRYL 438 to increase cure speed.

DERTOLINE® MG 105 is a glycerol ester of maleic rosin.