Products

Silcolapse® 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. Silcolapse® 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them.

Baerostab® BZ 8785 - US is a Zn liquid stabilizer and kicker.

Silcolapse® 454 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, crop protection products, detergents, chemicals, etc.). Its excellent behaviour in alkaline media and its efficiency in a wide range applications are of interest. Silcolapse® 454 is intended for industrial use only, and it should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

TAMOL® 1254 is a versatile, low-cost, low-foaming polyacid dispersant that offers outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant offers excellent stability and color acceptance even in formulations containing zinc oxide.

Silcolapse® 723 is a non-ionic aqueous 30% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. Silcolapse® 723 effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 723 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

CRAYVALLAC® ANTISETTLE CVP is used in caulks, solventborne coatings, and greases. It features anti-settling, good leveling, high shear thinning, high thixotropy, recoatability, and sag resistance. The product functions as a rheology modifier in CASE ingredients.

CRAYVALLAC® PA3 X 20 is used in solventborne coatings, top coats, varnishes, and wood coatings. It is compatible with acrylics, alkyds, nitrocellulose, and polyurethanes (PU) and is suitable for wood substrates.

Kane Ace® PA-81 is a medium molecular weight acrylic polymer that enhances the processing of PVC based formulations. Kane Ace® PA-81 is an excellent general-purpose processing aid that promotes a wide processing window, providing the flexibility to limit the number of processing aids for various applications especially transparent films.

EBECRYL® 7100 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7100 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7100 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7100 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

FH-173 is a kind of easily dispersed self-activating organoclay, which is a rheology modifier for esters, ketones, alcohols and ethers and other medium-high polarity solvents, paints and inks containing some aromatic solvents.It can be directly dispersed without an activator in xylene-esters (e.g., butyl acetate), xylene-ketones (e.g., cyclohexanone), and xylene-butanol, etc. in medium-high polarity solvent systems.

Kane Ace® PA-20 is a medium-low molecular weight acrylic polymer that enhances the processing of polyvinyl chloride (PVC) based formulations. Kane Ace® PA-20 is an excellent general purpose processing aid that promotes a wide processing window, providing the flexibility to limit the number of processing aids for various applications.

RHOPLEX® RM-232D is an acrylic binder and resin used in architectural coatings, automotive OEM coatings, automotive and transportation, industrial applications, paints and coatings, and textile manufacturing. It functions as a binder.

Baerostab® B-1657 is a liquid Potassium/Zinc Stabilizer and Kicker.

Baerostab® MC 93362 P is a high-efficiency calcium-zinc stabilizer designed for polyvinyl chloride (PVC) applications. It provides excellent heat stability and color strength, ensuring durable, weatherable profiles and PVC parts. This stabilizer effectively prevents plate-out and offers reliable long-term performance in demanding environments. Its high stability and efficiency make it ideal for use in PVC formulations requiring enhanced durability and color retention.

HFGEL 120-Z is an organophilic clay recommended for use in non-polar to intermediate polarity solvent ink and coatings systems and requires no polar activator. It is part of the newest generation of organoclays, being highly efficient and easy to disperse. It is designed for use in systems rather than solvents alone and is not suitable for lubricating greases or other binderless products.