Products

Paricin® 220 is N-(2-hydroxyethyl)-12-hydroxy- stearamide. It is a high melting point wax like material that has broad compatibility with natural and synthetic waxes, resins and polymers to provide excellent slip and lubricating properties.

CRAYVALLAC® WF-1000, with its fine particle size and very low coefficient of friction, provides the formulator with an excellent aid to controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Furthermore, the very high melting point of CRAYVALLAC® WF-1000 makes it an excellent choice for high temperature applications.

CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance and light stability are most favourable with this product.

ORGASOL® 3501 EXD NAT 1 is spheroidal copolyamide 6/12 powder with a narrow particle size distribution and an average diameter of 10μm. ORGASOL® 3501 EXD NAT 1 has a melting temperature of 142°C. An extremely high level of quality is achieved through rigorous control of the particle size distribution, ensuring excellent consistency of performance.

ORGASOL® 1002 ES 5 NAT1 is a spheroïdal powder of polyamide 6, with 50 µm as average diameter and a narrow particle size distribution.

Paricin® 285 Flake is a brittle wax like solid formed from the reaction of an amine with hydroxystearic acid. The formed hydroxystearamide is a high melting point, wax-like material that is extremely resistant to acids and alkalies in contrast to natural and synthetic ester waxes. Paricin® 285 Flake has excellent lubrication, anti-static and pigment wetting properties.

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.

Paricin® 285 Ground is a brittle waxlike solid formed from the reaction of an amine with hydroxystearic acid. The formed hydroxystearamide is a high melting point, wax-like material that is extremely resistant to acids and alkalies in contrast to natural and synthetic ester waxes. Paricin® 285 Ground has excellent lubrication, anti-static and pigment wetting properties.

Licowax® PED 191 Powder is an oxidized, high density polyethylene wax with high molecular weight.

Licocene® PP 6502 granules is a high melting metallocene technology based polypropylene homopolymer, which exhibits a high degree of crystallinity.

Exolit® OP 950 is a white granular powder based on an organic phosphinate. The product is not hygroscopic and slightly soluble both in water and in common organic solvents. It melts at 200°C.

Licocene® PP 7502 granules is a high melting metallocene technology based polypropylene homopolymer, which exhibits a high degree of crystallinity.

Licocene® PP 6502 FINE GRAIN is a high melting metallocene technology based polypropylene homopolymer, which exhibits a high degree of crystallinity.