Products

LOTADER® 3210 is a random ethylene-butyl acrylate-maleic anhydride terpolymer. LOTADER® 3210 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 3210 improves adhesion of LDPE on aluminum foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 3210 gives excellent adhesion on substrates likes aluminum foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 3210 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

EBECRYL® 740/40TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates.

VPS SIVO 260 is a novel multifunctional siloxane adhesion promoter with aminofunctionalities that can be used for various applications. VPS SIVO 260 is mainly dedicated for use in adhesives and sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers®) and RTV-silicones - especially to difficult to stick polycarbonate substrates. In addition, VPS SIVO 260 can lead to adequate adhesive cure and it imparts both additional flexibility and hydrophobicity.

EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. EBECRYL® 8311 can be easily incorporated into at any stage of formulating. Films of EBECRYL 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311is designed to be used as the main oligomer in formulations requiring a high degree of hardness, scratch, abrasion resistance and low development after abrasion

TEGO® AddBond DS 1300 improves adhesion of water borne coatings on steel, galvanized steel, aluminum, and plastics.

DPGDA is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water.

TEGO® Addbond LTK improves adhesion and flexibility of solvent borne coatings on steel and galvanized steel.

EBECRYL® 4141 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal.

AEROTEX® IBMA Monomer a homolog of N-methylolacrylamide (NMA), is the isobutyl ether of NMA. It contains a readily polymerizable vinyl group as well as a crosslinkable iso-butoxymethyl group.

Licocene® PP MA 7452 granules are used in hot melt adhesives. They feature good wetting, improved cohesion, and enhanced adhesion, along with good mechanical properties and reduced moisture uptake. It functions as an adhesion promoter, coupling agent, and wetting agent in both CASE ingredients and plastics & elastomers.

Staybelite® Resin is gum rosin that has been partially hydrogenated via a catalytic process. It is a pale, thermoplastic, acidic resin, Hydrogenation makes this resin highly resistant to oxidation and discoloration and to changes in solubility characteristics, when it is exposed to air and heat. In these respects, it is greatly superior to ordinary non- hydrogenated rosins.

Ceridust® 6050 M is a micronized metallocene-based polypropylene wax.

DERCOLYTE® S 115 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).