Products

CYMEL® U-1052-8 resin is an n-butylated urea-formaldehyde crosslinking agent supplied in a mixture of n-butanol and xylene. CYMEL® U-1052-8 resin has excellent compatibility with epoxy resins and is particularly suitable for interior can coatings where it contributes to good adhesion and pasteurization resistance. CYMEL® U-1052-8 resin is not recommended for topcoats requiring exterior durability.

CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications.

CYMEL® 1161 Resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. CYMEL® 1161 Resin is especially recommended for automotive topcoats, general metal finishes, and coil coatings

CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pH buffered alkaline waterborne formulations.

CYMEL® 1168 Resin is a highly monomeric, methylated/iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. CYMEL® 1168 Resin is especially recommended for automotive topcoats, general metal finishes, and coil coatings. While CYMEL® 1168 Resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

EBECRYL® 524 is an acid-modified polyester resin diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). It exhibits very low color and moderate acid value. EBECRYL 524 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is particularly useful in UV/EB laminating adhesives.

TEGO® AddBond LP 1600 improves adhesion and flexibility of solvent borne coatings on metal and plastic. It is solvent-free and highly suitable for high-solids coating systems.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

TEGO® VariPlus DS 50 strongly improves the mechanical properties of waterborne inks and coatings. It also improves resistance against water, solvents, and chemicals. It leads to excellent adhesion on plastics and improves intercoat adhesion.

TEGO® AddBond DS 1300 improves adhesion of water borne coatings on steel, galvanized steel, aluminum, and plastics.

TEGO® AddBond LTW-B improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.

TEGO® AddBond LTW improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.

CYMEL® 1133 Resin is a highly methylated, n-butylated melamine crosslinker with a high degree of alkylation. It has a higher butoxymethyl content and higher monomer content compared to CYMEL® 1130 resin. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 1133 resin suitable for automotive topcoat applications and general metal finishes requiring improved durability and resistance properties.