Products

Polycin® D-290 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane coating systems. Polycin® D-290, with its very low viscosity, will allow for the formulation of higher system solids with improved VOC reduction. Polycin® D-290 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

3M™ Glass Bubbles K25 are specially formulated to provide a high strength to weight ratio. This enhances survivability under demanding processing conditions, such as injection molding. These glass bubbles create stable voids, leading to low thermal conductivity and a low dielectric constant. Available in a variety of sizes and grades, 3M™ Glass Bubbles help meet specific product and processing requirements.

Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2­methoxy­ethoxy- silyl group.

Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable.

3M™ Glass Bubbles K46 are engineered hollow glass microspheres that are alternatives to conventional fillers and additives such as silicas, calcium carbonate, talc, clay, etc., for many demanding applications. These low-density particles are used in a wide range of industries to reduce part weight, lower costs and enhance product properties. The unique spherical shape of 3M glass bubbles offers a number of important benefits, including: higher filler loading, lower viscosity/improved flow and reduced shrinkage and warpage. It also helps the 3M glass bubbles blend readily into compounds and makes them adaptable to a variety of production processes including spraying, casting and molding. The chemically stable soda-lime-borosilicate glass composition of 3M glass bubbles provides excellent water resistance to create more stable emulsions. They are also non-combustible and non- porous, so they do not absorb resin. And, their low alkalinity gives 3M glass bubbles compatibility with most resins, stable viscosity and long shelf life.

Europrene® SOL T 9326 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 30 % wt and diblock content is 15 %. A non-staining, TNPP free antioxidant system is added during the production process.

Dynasylan® HYDROSIL 1151 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1151 is a colorless to slightly yellowish aqueous solution with an amine-like odur, miscible, with alcohols or water. Dynasylan® HYDROSIL 1151 contains about 40% active silane content in water.

Europrene® SOL T 9133 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 55 %. A non-staining, TNPP free antioxidant system is added during the production process.

Europrene® SOL T 6414 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 40 % wt and diblock content is 22%. A non staining antioxidant system is added during the production process.

TMPTA is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance.

NGT 200 L is a low viscosity, light colour renewable natural phenolic compounds; it is a mono hydroxyl phenol having a long hydrocarbon chain at meta position which makes it a very versatile material having different uses.

Dynasylan® 6598 is an oligomeric siloxane containing vinyl, propyl and ethoxy groups. Dynasylan® 6598 is a further development of Dynasylan®VTMOEO, vinyl-tris(2-methoxy ethoxy)silane. Dynasylan® 6598 is a colorless, nearly odorless low-viscosity liquid. Dynasylan® 6598 is an excellent silane compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (EPDM, EVA, PE).

Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYEO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic and aromatic hydrocarbons.

Europrene® SOL TH 2312 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colorless, nearly odorless low ­viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE).