Products

Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2­methoxy­ethoxy- silyl group.

EBECRYL® 3720-TM20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TM20 exhibits fast cure response and light color. Films of EBECRYL 3720-TM20 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

EBECRYL® 3203 is a low viscosity modified Bisphenol-A based epoxy acrylate oligomer that provides exceptional pigment wetting properties for black and white inorganic pigments and fillers. EBECRYL® 3203 gives a fast cure response when formulated with other oligomers cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 3203 is used for the preparation of high pigment loading pigment pastes produced using a 3-roll mill or bead mill.

AP 5949 is low viscosity, cycloaliphatic amine modified hardener for epoxy resin based lacquers and coatings.

D.E.N.® 426 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac. D.E.N. 426 Epoxy Novolac Resin is an epoxidized phenolic resin of higher functionality than standard bisphenol A based liquid epoxy resins. Epoxy novolac resins combine, in one molecule, the thermal stability of a phenolic backbone with the reactivity and versatility of an epoxy. They are distinguished by particular good thermal stability, mechanical strength and resistance against chemicals. They find ready acceptance for lining pipelines, storage tanks and pumps. D.E.N.® 426 has been developed to fill the gap between the two functional standard bisphenol F based liquid epoxy resins and the high viscous epoxy novolac resins.

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

D.E.R.® 325 liquid epoxy resin is a mono-functional reactive diluent modified reaction product of epichlorohydrin with Bisphenol-A.

EBECRYL® 605 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) to provide a lower viscosity, easier handling product. EBECRYL 605 exhibits light color and fast cure response. Films of EBECRYL 605 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness and superior chemical resistance.

D.E.H.® 508 curing agent is a modified aliphatic amine designed for use with liquid epoxy resins cured at ambient or elevated temperature. It has low viscosity and results in fast set time, high strength and modulus. It also provides good heat and acid and alkali resistance.

EBECRYL® 4201 is an undiluted aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance.

AP 1037 is low viscosity reactive, Mannich - based amine hardener for epoxy resins based lacquers and coatings.

EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. EBECRYL® LED 03 when combined with an appropriate photoinitiator system transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED03 exhibit a low odor after UV or EB curing.

3M™ Glass Bubbles HGS6000 is a non-combustible filler used in aerospace and hydrospace syntactic foams, printed wire boards, and radomes. It provides high filler loading, improved flow, low density, low thermal conductivity, low viscosity, low alkalinity, chemical stability, and water resistance. The product minimizes shrinkage and warpage, ensures viscosity stability, produces stable voids, and reduces part weight. It offers long shelf life and excellent processing stability.

AP 5941 is a low viscosity modified stabilized cycloaliphatic polyamine hardener for epoxy resin based lacquers and coatings.

D.E.R.® 323 liquid epoxy resin is a mono-functional reactive diluent modified reaction product of epichlorohydrin with Bisphenol A.