Products

COMFORTSIL FLD HYDROSOFT is a medium viscosity silicone copolymer, based on our patented HALS (Hindered Amine Light Stabilising) technology.

EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films of EBECRYL® 8807 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing.

EBECRYL® 8301-R is a hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 8301-R exhibit high hardness, scratch and chemical resistance, and are resistant to yellowing.

EBECRYL® 629 is an acrylated epoxy novolac diluted with the reactive diluents trimethylolpropane triacrylate (TMPTA) and hydroxyethyl methacrylate (HEMA). When cured via ultraviolet light (UV) or electron beam (EB), EBECRYL® 629 exhibits high surface hardness, good heat resistance, low shrinkage, and good adhesion to metal, particularly copper. This resin was specifically designed for UV cure solder resist applications.

EBECRYL® 2221 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to ultraviolet light (UV) or an electron beam (EB). Cured films of EBECRYL® 2221 exhibit good hardness and solvent resistance.

PLYAMUL® 307 is a low molecular weight, cellulose stabilized polyvinyl acetate homopolymer

D.E.H.® 611 is a curing agent used with epoxies (EP) in CASE ingredients.

EBECRYL® 6203 is used in radiation-curable coatings, solder resists, and marking inks. It features excellent adhesion, good hardness, heat resistance, and medium viscosity. The product functions as a binder and resin in CASE ingredients.

EBECRYL® 150 is an ethoxylated bisphenol A diacrylate commonly used as reactive diluent in UV/EB cure applications. EBECRYL® 150 can improve the cure response, hardness, and chemical resistance of UV/EB curable coatings and inks while maintaining good adhesion, and without imparting brittleness.

EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL® 5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance.

Bermocoll® M 10 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® M 10 contains methyl, ethyl and hydroxyethyl substitution giving a unique balance between workability and strength.

CARPOL® PES-305 is used in rigid polyurethane and polyisocyanurate applications. CARPOL® PES-305 is aromatic content provides increased energy efficiency and requires lower flame retardant levels in formulation. Its intermediate viscosity and higher functionality can be incorporated into a variety of applications.

EBECRYL® 8314 is an aliphatic urethane tetraacrylate diluted with the reactive diluents isobornyl acrylate (IBOA) and hydroxy propyl methacrylate (HPMA). Films of EBECRYL® 8314 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with excellent exterior durability properties. These performance properties make EBECRYL® 8314 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7110 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7110 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® 830 is a polyester hexa-acrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 830 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.