Products

Dynasylan® MTMS an alkyltrialkoxysilane is an important component in sol­gel systems. Dynasylan® MTMS is a colorless, low­viscosity liquid. Dynasylan® MTMS is regarded as trifunctional since all three alkoxy groups are able to hydrolyze. Additionally Dynasylan® MTMS contains a methyl group that adds organic character to the products. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Preventol® A 12-TK 50 is for the manufacture of aqueous and solvent formulations for preservation of wood composites, wood in above ground and in-ground applications, leather, films, glues, adhesives, and metalworking fluids.

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Preventol® A 12-TK 48 is for the manufacture of aqueous and solvent formulations for preservation of wood composites, wood in above-ground and in ground applications, leather, films, glues, adhesives, and metalworking fluids.

PEBAX® 4533 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 4533 SP 01 is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® Rnew® 80R53 SP 02 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable and sustainable source (castor oil). PEBAX® Rnew® 80R53 SP 02 is heat and UV stabilized. It is used in sport and consumer applications.

PEBAX® 7033 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 7033 SP 01 has been developed to be heat and UV resistant.

D.E.H.® 444 Epoxy Curing Agent is a low viscosity modified cycloaliphatic amine based curing agent for epoxy resins.

D.E.H.® 445 Epoxy Curing Agent is a modified cylcoalipatic amine based curing agent for epoxy resins. It contains no nonylphenol.

D.E.H.® 630 is a modified cycloaliphatic amine epoxy curing agent.

COPRO® SP-490 is a multi-functional acrylic emulsion polymer.

Protectosil® SC CONCENTRATE is suited for an easy to clean reatment of many mineral substrates.

MAINCOTE™ 5045C Emulsion is an aqueous acrylic emulsion polymer based on AVANSETM Acrylic Resin Technology. It facilitates the formulation of coatings to less than or equal to 25 g/L VOC for use in light to medium duty industrial maintenance and protective coatings applications. It offers excellent UV durability, corrosion resistance, block resistance, and ease of formulation with excellent paint stability. It can be formulated into highly durable topcoats and high gloss direct to metal (DTM) finish coats. When formulated at 25 g/L VOC or below, MAINCOTE™ 5045C Emulsion offers improvements in these properties versus many current DTM finishes formulated at higher VOC levels of 100 g/L and above. The low coalescent demand of MAINCOTE™ 5045C Emulsion allows compliance with stringent VOC regulations. MAINCOTE™ 5045C contains no intentionally added APEO (alkylphenol ethoxylate) surfactants and no intentionally added PFAS.

MAINCOTE™ AE-58 is an aqueous acrylic emulsion copolymer which can be crosslinked with waterborne dispersions of epoxy resin in two-component acrylic/epoxy coatings. The resulting acrylic/epoxy coatings have properties such as low VOC, long pot life, and outstanding hardness, UV durability and solvent/chemical resistance. The high performance coatings can be used in a variety of interior and exterior applications for metal and concrete surfaces, such as institutional wall coatings and industrial metal primers, topcoats and direct-to-metal (DTM) coatings.

OPTI-MATT™ A-2000LV Duller is a silica-free duller with enhanced dulling capabilities, soft touch, and excellent product stability. It is designed to be the “dull” component for esthetically appealing furniture leather topcoats with high physical performance requirements. This duller offers a soft touch to topcoat finishes and enables good physical performance, including exceptional burnish resistance and excellent rub fastness and flexibility. It is supplied as a low medium viscosity liquid that is particularly easy to handle and formulate, while retaining good storage stability. Minimal mixing is required to help ensure uniformity.