Products

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

BONDERITE® S-FN 333 is a blend of fluorocarbon lubricants in an organic resin binder and solvent system designed for applications beyond the scope of conventional fluorocarbon coatings. Its low coefficient of friction, hardness, adhesion, resiliency, and cure conditions allow application of BONDERITE® S-FN 333 in a multitude of places where pure sintered PTFE coatings are unsuitable. Coatings of BONDERITE® S-FN 333 wear longer than pure PTFE, offer superior chemical resistance, and can be repaired without removing the existing coating. BONDERITE® S-FN 333 combines the toughness of the support resin with the surface properties of pure PTFE.

BONDERITE® S-FN 213 ACHESON is designed to provide controlled electrical resistance properties. BONDERITE® S-FN 213 ACHESON is a dispersion of finely divided graphite pigment in an epoxy resin solution. When properly cured, it has excellent adhesion to epoxy circuit boards, bushings, plastics and ceramics. BONDERITE® S-FN 213 ACHESON also has excellent wearing properties. It provides chemical resistance to oils and many solvents, but not to enamel strippers. BONDERITE® S-FN 213 ACHESON as a lubricant coating provides clean, dry, long-wearing, and superior maintenance-free lubrication for a wide range of light to medium load applications. A thin film of BONDERITE® S-FN 213 ACHESON keeps wear uniform and reduces friction on mating metal parts without requiring increased manufacturing tolerances. Components are protected from metal-to-metal contact even in applications approaching boundary lubrication, reducing the risk of damage due to partial or complete seizure. Formulated from processed micro-graphite and epoxy resin, BONDERITE® S-FN 213 ACHESON forms tightly adherent coatings on many types of substrates. In addition to high lubricity, BONDERITE® S-FN 213 ACHESON coatings exhibit extremely good wear resistance to oils and solvents (except enamel strippers).

BONDERITE® S-FN 8301 is designed for lubricant applications where environmental regulations restrict emissions of VOC (Volatile Organic Compounds). BONDERITE® S-FN 8301 provides good wear, low coefficient of friction, solvent resistance, and resistance to chalking in UV exposure. After dip or spray application, BONDERITE® S-FN 8301 can be either air dried or forced dried with heat. This superior coating material offers lifetime lubrication for heat-sensitive substrates, complex machined precision steel parts, light metals (copper, aluminum), and some non-metallic materials.

RHOPLEX® TP-257 is a high-solids binder for waterborne acrylic traffic paints, which offers a good cost/performance balance. Quick-drying striping paints formulated with RHOPLEX® TP-2577 resist the rigorous environment encountered on highways and related surfaces such as airfields and parking lots.

TMPTA is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance.

RHOPLEX® SS 4 is designed for use in the sports surfaces area. RHOPLEX® SS 4 is a 100% acrylic with quick-drying tendencies that will resist the rigorous environments encountered on many exterior sports surfaces.

Hatcol® 3812 is aN advanced high-stability polyol esters.Hatcol® 3812 was developed to provide clean lubrication in high temperature environments, especially where lubricant deposits or coking residues are a problem. It contains antioxidants, anti-wear, and anticorrosion additives selected and balanced for optimum performance in a polyol ester lubricant.

Europrene® K SOL 1205 is a solution styrene butadiene partial block copolymer, polymerized using an alkyl lithium catalyst at the Yeosu production facility in Korea. A non staining, BHT and TNPP free antioxidant system is added during the production process.

ORGASOL® 2001 UD NAT 1 is a spheroïdal powder of polyamide 12, with 5 µm as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance

HR-442 is synthesized from a polymer compound, which has hydrophobic and oleophobic effects. After being added to powder coatings, the fingerprints of the coating film can be eliminated immediately, showing excellent effects of eliminating handprints and graffiti, as well as lubricity, scratch resistance and wear resistance.HR-442 is a universal product and can be used in various systems. It can be used in matte, dead matte, silver electroplating and various metallic powder coating that require anti-fingerprint and anti-handprint. High gloss powder does not affect gloss, screen printing and repainting.

APODIL 1014 is a high viscosity, aliphatic polyepoxide (tetra-functional or higher) reactive diluent based on sorbitol or glucitol (bio-based). It is compatible with all types of epoxy resins in any proportion.

WANNATE® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity.