Products

DzBh Baling® SBS YH-791H is a linear styrene/butadiene block copolymer.

D.E.R.® 325 liquid epoxy resin is a mono-functional reactive diluent modified reaction product of epichlorohydrin with Bisphenol-A.

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

HP7622 is a high solids, water-reducible polyester dissolved in glycol ether EB (butoxyethanol). It is soluble in water after neutralization with amine. Stability and solubility in water may be improved with additional glycol ether EB or 2-butanol. It is a very linear polymer and provides excellent flexibility when combined with amino resins in baking finishes.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

MAINCOTE™ HG-86 is a binder and resin used in primers, traffic paints, and waterborne paints. It features early rain resistance, easy application, excellent glass bead retention, fast drying, high durability, low VOC, night visibility, and prolongs wear life.

EBECRYL® 9103 is used in radiation-curable coatings. It functions as a monomer and oligomer in CASE ingredients.

Dynasylan® SILBOND® H-5 is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for the precision investment casting industry. It contains a higher percentage (approximately 19.5%) silica content (as SiO₂) and a lower acidity level than Dynasylan® SILBOND® H-4. It is well suited for use in block-casting applications.

MAINCOTE™ 4950 Resin is an aqueous acrylic emulsion polymer that facilitates the formulation of coatings to less than or equal to 50 g/L VOC for use in light to medium duty maintenance and protective coatings applications and general industrial metal finishing applications. It offers excellent exterior durability and corrosion resistance, and ease of formulation with excellent paint stability. MAINCOTE 4950 Resin offers improved corrosion resistance versus current direct-to-metal (DTM) finish coats formulated below 100 g/L. It also offers good architectural gloss and trim paint properties. Low coalescent demand allows compliance with stringent VOC regulations.

H.B. Fuller® PD-0431 is a carboxylated, surfactant stabilized acrylic emulsion polymer.

EMERAL EMR D1250BG is a binder used in coatings, specifically for metallic paints.

RHOPLEX® VSR-50C Binder is a 100% acrylic latex designed for premium architectural flat to gloss interior and exterior coatings. Its low coalescent demand allows the formulator to meet 50 g/L VOC regulations with some freeze-thaw capability. RHOPLEX® VSR-50C Binder offers excellent surfactant leaching, water resistance properties, and alkali resistance. It provides proven superior exterior durability after several years of exposure over a variety of substrates such as wood, metal, and masonry for dirt pick-up resistance, efflorescence resistance, crack resistance, and tint retention. It is easy to formulate, slurry compatible, and has good block resistance.

MKOREZ® HRR-100 is organic silane modified hydrocarbon resin. HRR means High Reactive Resin, as it can be cured by moisture and heat. This grade is especially designed for reactive hot-melt adhesive and can be used with reactive polyolefin materials such as silane functionalized polymer. HRR-100 can be used as adhesion promoter in various adhesive application for industrial usage such as automotive, woodworking, textile and so on. It shows excellent adhesion on various substrates such as PP, PC, ABS, PE and so on. It can be used for enhancing good properties and overcoming weakness of existing POR. POR is eco-friendly adhesive to replace PUR. (POR : polyolefin reactive, PUR : polyurethane reactive)

OREVAC® 18730 is a maleic anhydride modified polypropylene.

RHOPLEX® VSR-1065C is an APEO (alkyl phenol ethoxylate) surfactant free1 100% acrylic binder with ambient cross-linking technology and specially engineered polymer architecture. RHOPLEX® VSR-1065C delivers exceptional performance in semigloss through flat formulations for both interior and exterior applications. Paint made with RHOPLEX® VSR-1065C Emulsion exhibits excellent stain removal, scrub resistance, film hardness, adhesion and exterior durability. RHOPLEX® VSR-1065C Emulsion offers paint formulators a versatile resin along with added benefits including low VOC capabilities without sacrificing early hot block resistance. RHOPLEX® VSR-1065C contains no intentionally added PFAS.