Products

AEROSIL® R 208 Coating is a fumed silica after-treated with polydimethylsiloxane.

Bermocoll® M 30 Q is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® M 30 Q contains methyl, ethyl and hydroxyethyl substituents giving a unique balance between workability and strength.

HFGEL 120-D17 is a kind of modified organoclay, which has the characteristics of high purity, light gel color and good heat stability. It is a good rheology modifier for paints and inks in low, medium and high polarity solvent systems such as aliphatic hydrocarbons, esters and ketones. It is self-activated in medium to high polarity solvent systems such as xylene - esters (such as butyl acetate) and xylene - ketones (such as cyclohexanone), and sometimes an appropriate amount of polar activator is helpful for dispersing. It requires to add polar activators to help disperse in the aromatic hydrocarbons such as toluene, xylene, aliphatic hydrocarbons such as 200 # solvent oil, white oil (mineral spirit) and other low polarity solvent systems.

SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® FPS-5 is an extremely finely ground silica.

Licocene® PP 1302 granules is a propylene-Ethylene-Copolymer Wax.

AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane)

HFGEL 120-B12 is an organophilic clay designed for use in aromatic and polar systems such as those containing aromatic hydrocarbons, alcohols, ketones, glycol ethers, and esters. It does not require use of a chemical activator to reach optimal efficiency. HFGEL 120-B12 can be incorporated at any point in the manufacturing process using common processing equipment. HFGEL 120-B12 provides stable rheology and helps control sag and pigment settling.

ACRYSOL™ RM-725 Rheology Modifier is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) based on proprietary technology for an excellent balance of properties. ACRYSOL™ RM-725 Rheology Modifier is designed as a universal, efficient mid shear viscosity builder with all binder types that are used for interior wall paints as well as exterior systems for wood, trim stains and masonry. This KU-building associative thickener offers formulators an excellent balance of sag resistance and leveling, including PVA and VAE binder based paints. ACRYSOL™ RM-725 Rheology Modifier also contributes significant to high shear viscosity, allowing the reduction of ICI builder use level in the paint.

CRAYVALLAC® SLT is a high performance micronised amide wax rheology modifier designed for activation-free manufacture of moisture curing methoxysilane based systems. Simple stirring is only necessary to get full efficiency. CRAYVALLAC® SLT is also suitable for the activation-free manufacture of moisture curing methoxysilane based adhesives. CRAYVALLAC® SLT is specially designed for the low temperature manufacture of one-component methoxysilane sealants where processing temperatures typically lie within the range 30 - 80°C. CRAYVALLAC® SLT particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a veryhigh viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

CRAYVALLAC® LA-250 is a modified urea dissolved in DMSO and is a pourable liquid rheology modifier for post addition to low polarity solvent based coatings. CRAYVALLAC® LA-250 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

Bermocoll® EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

Licowax® PED 191 flakes is a oxidized polyethylene wax with high viscosity.

Aluminum Stearate 1032 is a medium bulk density, white powder.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

Licocene® PP MA 6452 granules are used in metal casting and hot melt adhesives. They offer excellent adhesion, good compatibility, heat resistance, improved cohesion, and anti-slip properties. It functions as an adhesion promoter, coupling agent, and release agent in industrial additives.