Products

TEGO® Wet 290 shows excellent wetting and anti-crater properties with flow promotion in water borne coatings.

DYNOL™ 360 is an organic-based superwetter providing great substrate wetting especially on difficult-to-wet substrates. DYNOL™ 360 also acts as a coalescing aid and is suitable for waterborne coatings and inks.

SURFYNOL® 104 is a multi-functional surfactant that combines dynamic wetting and molecular defoaming in waterborne coatings and inks. SURFYNOL® 104 is available in liquid form in different solvent cuts.

SURFYNOL® 104 H is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

TEGO® Dispers 658 is a non-ionic wetting and dispersing additive that can be used in waterborne formulations and in universal colorants. It provides excellent pigment wetting and color strength development especially for organic pigments.

TEGO® DISPers 705 is a wetting and dispersing additive for solvent borne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites.

SURFYNOL® PSA-336 provides excellent dynamic wetting on difficult- to-wet substrates. This wetting agent is very easy to formulate into water-based systems.

SURFYNOL® MD-20 is a very compatible molecular defoamer based on Gemini surfactant technology. Freeof siliconeand silica. Offers additional dynamic wetting properties.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

Focus Ester OE 1005 is specially designed to use in water-dilutable metalworking coolants. Focus Ester OE 1005 will provide lubrication and corrosion protection with outstanding wetting characteristics. Using Focus Ester OE 1005 will reduce or eliminate the amount of additives needed in metalworking coolants, like chlorine, fatty acids and amides. Focus Ester OE 1005 does not contain any phosphorus, chlorine or sulfur and is ashless.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

TEGO® DISPers 670 is a polymeric, high-performance wetting and dispersing additive for solvent borne industrial and automotive applications. Suitable for all kinds of pigments. Shows outstanding viscosity reduction, especially with inorganic pigments. Shows fast pigment wetting. Creates a Newtonian flow behavior.

TEGO® DISPers 650 is a non-ionic wetting and dispersing additive that can be used in waterborne and solventborne formulations and in universal colorants. Especially for organic pigments;providesexcellent color strength development.

Licocene® PP MA 7452 granules are used in hot melt adhesives. They feature good wetting, improved cohesion, and enhanced adhesion, along with good mechanical properties and reduced moisture uptake. It functions as an adhesion promoter, coupling agent, and wetting agent in both CASE ingredients and plastics & elastomers.

CARPOL® NIONIC™ P1000 Polyglycol is a linear polymer produced by the polymerization of propylene oxide with propylene glycol. The P1000 nomenclature indicates a propylene oxide based product with a molecular weight of 1000. It is a clear, viscous liquid at room temperature with a low vapor pressure. It exhibits excellent lubricity and can be used in synthetic lubricant applications. It is suitable as an antifoam agent in latex formulations, pulp and paper processing, emulsion paints, and various food processes.