Products

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

LOTADER® 4513T is a random ethylene-methyl acrylate-maleic anhydride terpolymer. Versatile ready-to-use tie layer resin for extrusion lamination/coating, not intended to be diluted. Provides excellent adhesion in direct bonding onto printed, reverse-printed and plain films (OPET, OPP, CPP, OPA) while having a good processability in extrusion coating and lamination onto foil, metallized films, paper and board.

LOTADER® AX8750T is a random Ethylene-Butyl Acrylate - Glycidyl Methacrylate terpolymer (E-BA-GMA). Acrylic ester brings softness and polarity, while keeping high thermal stability during processing. The high content of acrylic ester leads to high flexibility (low crystallinity) and high impact absorption behaviour. Glycidyl methacrylate gives reactivity (versus OH, COOH and NH₂ groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8750T is compatible with LDPE in all proportions, and with most of ethylene copolymers. LOTADER® AX8750T is suitable as an additive to improve impact strength of engineering thermoplastics (PPS, PBT, PET) and PC/PBT, PC/PET and PC/ABS alloys. LOTADER® AX8750T can be used as a compatibilizer for polyesters/polyolefins blends, as bitumen performance enhancer and adhesion promoter onto metallic surface.

Silcolapse® 454 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, crop protection products, detergents, chemicals, etc.). Its excellent behaviour in alkaline media and its efficiency in a wide range applications are of interest. Silcolapse® 454 is intended for industrial use only, and it should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

LOTADER® AX8840 is a random ethylene-glycidyl methacrylate copolymer. Glycidyl methacrylate provides reactivity (versus OH, COOH and NH2 groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8840 is compatible with LDPE in all proportions, and with almost all other ethylene copolymers. LOTADER® AX8840 exhibits good adhesion on PET, PBT, PPS, metal, paper, glass. Due to its reactivity induced by the glycidyl methacrylate, LOTADER® AX8840 can be used as a compatibiliser for polyesters/polyolefins blends and as an adhesive for some laminate structures (polyolefins/polyesters, polyolefins/PPS etc.).

LOTADER® 18603T is a reactive ethylene-methyl acrylate copolymer, it has been designed to coextrusion application with polyethylene, ethylene copolymers, polyamides, EVOH, PET and PS. It can also be used as a coupling agents for HFFR compounds as well as impact modifiers for polyamides. LOTADER® 18603T is compatible with most tackifying resins and waxes and can be used in hot melt adhesives formulations. LOTADER® 18603T is also suitable to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminum, foils.

MIRASIL DM 1000 is used in personal care applications.

Bluesil™ FLD 47 V1 000 is straight chained polydimethylsiloxanic fluids.

LOTADER® 9318T is a random ethylene-vinyl acetate-maleic anhydride terpolymer (EVA- MAH). As an ethylene copolymer, LOTADER® 9318T is compatible with PE in all proportions, and with most ethylene copolymers. Vinyl acetate brings softness, flexibility, and polarity while maleic anhydride brings reactivity, leading to versatile adhesive properties to polar and non-polar substrates. As a result of high-pressure polymerization in tubular reactor, LOTADER® 9318T also exhibits high transparency (low haze). LOTADER® 9318T can be used to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminium foils, fiber mats, foams. LOTADER® 9318T is also suitable as a tie layer between polyethylene and polyamide in blown film, cast film or in tubes co-extrusion. It can be used as a coupling agent in cables compounds formulations.

LOTADER® 3210 is a random ethylene-butyl acrylate-maleic anhydride terpolymer. LOTADER® 3210 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 3210 improves adhesion of LDPE on aluminum foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 3210 gives excellent adhesion on substrates likes aluminum foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 3210 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

Silcolapse® 610 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and non-aqueous industrial applications. Silcolapse® 610 effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 610 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Indopol® H-1900 functions as an emollient, solubilizer, dispersant, viscosity modifier, and stabilizer in cosmetic ingredients.

EVATANE® 28-40 is a random ethylene-vinyl acetate copolymer.

Indopol® L-14 is a polybutene from the polyalkene chemical family, functioning as an extender, tackifier, and plasticizer in plastics and elastomers.