Products

Exolit® OP 1240 is a flame retardant based on an organic aluminum phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products.

D.E.N.® 438-MK75 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl isobutyl ketone.

3M™ Boron Nitride Cooling Filler Platelets 003 SF is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, lightweighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

CARBOWET® 138 is a non-ionic wetting additive that provides additional dispersing properties. Wets all kinds of pigments. Was designed as alternative to APEs with a HLB-value around 14.

Aluminium Powder TGR20-X is an odourless light grey material which is available in a range of sizes up to 1mm. Above this, the product is usually referred to as granulate. It is produced commercially by atomizing molten aluminium using air or inert gas. Aluminium Powder TGR20-X is available in a range of sizes, the first grade commercially available has a median size of 1 micron. And all aluminiuim powder is made from minimum 99.85% purity aluminium ingot.

KRONOS® 2300 is a cost-effective, dispersible pigment with good brightness and high performance that improves coating hiding power. It is used in architectural paints, high gloss and low haze coatings, packaging finishes, and paper coatings. Markets include architectural coatings, automotive OEM, industrial coatings, ornamentals, packaging coatings, pest control, and turf management.

KRONOS® 2073 is a pigment with good brightness, dispersibility, and strong opacity. It is used in vitreous enamel coatings, man made fibers, printing inks, and plastics applications including flexible PVC, molded products, rigid PVC, and sheets.

Exolit® AP 740 S is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 S differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence and has compared to Exolit® AP 740 a reduced water uptake. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access.

KLEAROL® White Mineral Oil is a refined white mineral oil used in food ingredients and fluids & lubricants markets.

Dynasylan® OCTMO is a monomeric medium­ chain alkyl functional silane. Dynasylan® OCTMO is a clear colorless liquid and soluble in common non­polar organic solvents (e.g. petroleum ether, toluene). However its low volatility and viscosity make Dynasylan® OCTMO an easy ­to ­handle additive. During the hydrolysis reaction between water and Dynasylan® OCTMO a certain amount of methanol (VOC) is released.

Dynasylan® F 8261 is a bifunctional silane possessing hydrolyzable inorganic ethoxysilyl groups and a fluoroalkyl chain. Dynasylan® F 8261 acts as a surface modifier on mostly hydroxyfunctional substrates (e.g. glass, ceramic). It can also be used as an adhesion promoter between inorganic materials and fluoropolymers (PTFE, fluorosilicones etc.). Dynasylan® F 8261 is a colorless and odorless liquid. It can be diluted to a proportion of about 25 wt.% in ethanol and various other organic solvents, e.g. n-hexane, xylene, acetone or ethyl acetate.

Pyure® Prime is a high purity (white to slightly off-white) fine powder extracted from the Stevia rebaudiana Bertoni plant.

Focus InhibitR 454 is a rust preventive that is emulsifiable in water. When water is allowed to evaporate, this product forms a thin waxy film to protect steel surfaces from rusting. Focus InhibitR 454, built off a long hydrocarbon chain, can also supply lubricity properties to a water-based fluid. When added to soluble oil or semi-synthetic metalworking coolant concentrates, Focus InhibitR 454 can provide a significant increase in corrosion control.

Licowax® PE 520 fine grain is a medium-molecular weight, non-polar copolymer wax.