Other Processing Additives

Pyure® Organic Stevia Leaf Extract Reb M 95% is a high purity (white to slightly off-white) fine powder extracted from the Stevia rebaudiana Bertoni plant.

Baling® YH-502T is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B- S, with bound styrene of 30%mass.

D.E.H.® 52 Epoxy Curing Agent is a viscous aliphatic polyamine epoxy adduct curing agent. D.E.H.® 52 Epoxy Curing Agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, However D.E.H.® 52 Curing Agent is much less hygroscopic than standard polyamines. D.E.H.® 52 Epoxy Curing Agent is extremely reactive with liquid epoxy resins at room temperature and is used in the maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.® 52 Curing Agent is particularly suitable for colorless coatings or adhesive systems.

Dynasylan® F 8815 is a fluoroalkylfunctional water-borne oligosiloxane which acts as a surface modification agent on oxidic, carboxy- and hydroxyfunctional substrates for example ceramic, natural fibers like cotton or leather. Dynasylan® F 8815 is a yellowish, slightly turbid liquid. The product can be mixed with water to any desired concentration.

CEASIT AV FI VEG is a high bulk density, free flowing granular form of calcium stearate.

SOCER BRAZIL COL 1440 is 100% Elliottii Rosin obtained by distillllation of crude gum / pine oleoresin collected from Pinus trees (live).

Dynasylan® 2101 is a 100% active ureidosilane. It contains no organic tin compounds and no toxic carbamates above the declaration limit.

Bermocoll® E 230 X is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products.

CARPOL® GSP-280 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a functionality of seven and a typical hydroxyl value of 280. Due to this polyol’s functionality, its niche is rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® GSP-280 is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity.

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.