Other Processing Additives

Dynasylan® 1175 is a cationic polymeric aminofunctional silane possessing hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® 1175 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter and as a surface modifier. Dynasylan® 1175 is a dark yellow to brown liquid. Dynasylan® 1175 contains 40% active ingredient and about 60% of methanol. Dynasylan® 1175 is miscible with water, with hydrolysis occurring.

SUKOREZ® SU-120 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Acheson SB-1 is a blend of commonly available solvents designed for use with Electrodag® 440, Emralon® 329, Emralon 335, and others. Acheson SB-1 is used to facilitate good handling and applicator convenience with the above products when spray applied.

NGT 1800-171 is borne from ecofriendly economical feed stream like Cashew Nutshell Liquid (CNSL). It is low viscosity, clear and light color product derived from renewable natural phenolic compound. It is a catalytic product of the Mannich reaction with resultant as Mannich polyol. It has comparatively low viscosity giving easy processing controlled reactivity and easily adjusted to suit various requirements and produces foam with good dimensional stability and mechanical properties.

CARPOL® NIONIC™ P3000 Polyglycol is a linear polymer produced by the polymerization of propylene oxide with propylene glycol. The P3000 nomenclature indicates a propylene oxide based product with a molecular weight of 3000. It is a clear, viscous liquid at room temperature with a low vapor pressure. It exhibits excellent lubricity and can be used in synthetic lubricant applications. It is suitable as an antifoam agent in latex formulations, pulp and paper processing, emulsion paints, and various food processes.

Dynasylan® F 8261 is a bifunctional silane possessing hydrolyzable inorganic ethoxysilyl groups and a fluoroalkyl chain. Dynasylan® F 8261 acts as a surface modifier on mostly hydroxyfunctional substrates (e.g. glass, ceramic). It can also be used as an adhesion promoter between inorganic materials and fluoropolymers (PTFE, fluorosilicones etc.). Dynasylan® F 8261 is a colorless and odorless liquid. It can be diluted to a proportion of about 25 wt.-% in ethanol and various other organic solvents, e.g. n-hexane, xylene, acetone or ethyl acetate.

CIMTUFF® 9110 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTUFF® 9110 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTUFF® 9110 is platy, hydrophobic, non-abrasive and chemically inert.

RHOPLEX® I-545 is a versatile all-acrylic aqueous vehicle suitable for overprint varnishes and letdowns for flexographic and gravure ink applications. It is a hard film former that offers a distinct combination of properties - good gloss, heat resistance and water resistance with fast drying speed. On press, RHOPLEX® I-545 has excellent transfer and printability with good resolubility for ease of clean-up.

Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate.

RHOPLEX® I-2183N is a modified aqueous acrylic polymer offering excellent heat resistance properties as an overprint varnish and a general ink letdown vehicle. It is a hard film former that offers excellent heat resistance without the use of zinc or zirconium additives. In fact zinc compounds should not be used as they will detract from performance. On press, RHOPLEX I-2183N has excellent transfer and printability with good resolubility for ease of clean up.

Milled Hurd 99 are ideal for absorbent applications and biocomposites. Our hurd fiber products are sustainably sourced, rapidly renewable, and expected to be free from dust and foreign materials.

Licocene® PP 1602 granules is a low melting metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity.