Industrial Coatings

AEROSIL® R 812 S is a fumed silica after-treated with HMDS.

D.E.R. 642U-20 Solid Epoxy Resin is a novolac modified resin and has an average functionality of approximately 2.6. It is designed for powder coating applications. The resin is mainly used in industrial powder coatings in combination with D.E.R. 663U Resin, D.E.R. 664UE Resin or D.E.R. 667E Resin cured with a phenolic hardener such as D.E.H.™ 80 Curing Agent. Such formulations provide excellent corrosion and chemical resistance combined with good mechanical properties. Typical applications include pipe coatings and internal drum linings.

RGC™ 39T is a partially graphitized carbon product manufactured using proprietary electro-thermal purifi cation technology. RGC™ 39T higher porosity plays a major role in important properties, such as resiliency, sound dampening, wear rate and friction reduction, heat dissipation, shock wave mitigation and others. Best suited applications are tribology and thermal conductivity in both thermosets and thermoplastics. Porous structure also provides better compatibility with polymeric chains during compounding. RGC™ 39T specific sizing process makes its non-fluffy even at a very fine size range, which makes it a suitable candidate for polymeric coatings.

TEGO® Wet 238 is a modified polyether-siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterbornecoatings and inks.

D.E.N.® 438-A85 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in acetone.

TEGO® Foamex 883 is a highly effective deaerator concentrate based on polyether siloxane technology. Good long-term effectiviness against foam.

TEGO® AIREX 910 is a dearator solution with outstanding compatibility. Very suitable for sensitive coating systems.

TEGO® Rad 2200 N is a radically cross-linkable slip and substrate wetting additive combining utmost compatibility and strong slip. Recommended for systems requiring leveling and improvement of flow.

D.E.R.® 723 is an aromatic liquid epoxy resin based on a reaction product of epichlorohydrin and ortho-cresol.

AEROSIL® 200 Coating is a hydrophilicfumed silica with a specific surface area of 200 m²/g. Widely usable in a broad range of applications.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

MAINCOTE™ HG-86 is a binder and resin used in primers, traffic paints, and waterborne paints. It features early rain resistance, easy application, excellent glass bead retention, fast drying, high durability, low VOC, night visibility, and prolongs wear life.

Thetawet™ FS-8235 is an anionic surfactant used as an anti-blocking and release agent in architectural paints, lacquers, solventless and high solids coatings, and top coats. It is also used in polishes as an industrial additive. It features excellent block resistance, weatherability, release properties, long open time, and soil resistance.

AEROSIL® R 208 Coating is a fumed silica after-treated with polydimethylsiloxane.

KRONOS® 2310 has outstanding optical properties and very high weather resistance in coatings.