Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Function
- Anti-Wear Agent, Corrosion Inhibitor, Antioxidant, Additive Packages
- Product Code
- MITM08175
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Compatible Substrates & Surfaces
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Markets
- Applications
- Product Applications
Additin® RC 9305 is ideally suited for use in ashless hydraulic fluids for which the following high performance demands have to be met: According to requirements, the recommended treatment levels of Additin® RC 9305 are in the range of 0.5% by weight.
- High load carrying capacity
- Good demulsification
- Good corrosion protection against steel and non-ferrous metals
- Good filterability
- Excellent thermal and hydrolytic stability
Additionally Additin® RC 9305 is also ideally suited for formulating compressor fluids with antiwear properties based on high quality mineral oil as well as PAO and PAO/ester mixtures.
According to requirements, the recommended treatment levels of Additin® RC 9305 are in the range of 0.5% by weight.
Properties
- Physical Form
- Soluble In
- Solubility Data
Soluble in mineral oils and synthetic base oils. However, it is necessary to verify the solubility in the base oils used and the compatibility with other additives.
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Safety & Health
- Safety Conditions
Shelf life (months) at recommended temperature 24 Maximum storage temperature (°C) 30 Maximum short term storage temp. for storage time of 1 month (°C) 45 Maximum shelf life at 20 °C (months) 24 Maximum shelf life at 45 °C (months) 1 Maximum handling (unloading/pumping) temperature (°C) 60 Pourpoint (°C) -26 Viscosity at 40 °C (mm²/s) 135 Viscosity at blending temperature (mm2/s at °C) 10 @ 80°C Recommended blending temperature (°C) 60 Maximum blending temperature (°C) 80 Maximum skin temperature during heating
When product is flowing (°C) 100 When product is stationary (°C) 70
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage and Handling Conditions
- In a dry place at room temperature approx. 24 months. This product is liable to crystallization at low temperatures.
- If this occurs, gentle warming up to 40 - 50 °C with agitation will ensure homogenity of the product without adverse effects.
- Local overheating - above 60 °C - must be avoided.
Other
- Appearance
- Light colored clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellow
- IATA/ICAO Proper Shipping Name
- Corrosive liquid, acidic, organic, N.O.S. (phosphoric acid partial ester, alkylphenols)
- IATA/ICAO UN Number
- UN 3265
- Item Number
- Odor (SDS)
- Phenol like
- USA/DOT Proper Shipping Name
- Corrosive liquid, acidic, organic, N.O.S. (phosphoric acid partial ester, alkylphenols)
- USA/DOT UN Number
- UN3082
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 mo - Physical Properties
Value Units Test Method / Conditions Density 980.0 kg/m³ ASTM D1298 at 20°C Flash Point 135.0 °C Cleveland Open Cup Flash Point 135.0 °C ASTM D92 - Material Composition
Value Units Test Method / Conditions Mineral Oil Content 5.0 %(W/W) - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.5 %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.98 g/cm³ at 68°F Flash Point (SDS) 275.0 °F Closed Cup Kinematic Viscosity (SDS) 135.0 mm²/s At 104°F